390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Atmasphere S-30
Ausstattung & technische Daten
| Features | |
| Balanced Differential Design® | |
| Class-A operation | |
| Patented Circlotronic® direct-coupled (OTL) output stage | |
| Dual-mono chassis construction | |
| Automatic bias - no adjustment needed | |
| Built in VU meter for tube and output monitoring | |
| Easily monostrapped for greatly increased power | |
| Uses only one gain stage for supreme clarity of sound | |
| Proprietary precision components used throughout | |
| Low-noise "star" grounding topology | |
| Fully hand-wired point-to-point electronics - no circuit boards! | |
| Stable with all input and load conditions | |
| Exclusively uses Octal-Triode based vacuum tubes | |
| Classic open chassis construction with Wrinkletex™ finish | |
| Three-year general coverage warranty, one year warranty on output tubes | |
| Specifications | |
| Output power | 30 watts per channel into 8 Ω load |
| 45 watts per channel into 16 Ω load | |
| Impedance | Input Impedance: 100 KΩ single-ended, 200 KΩ balanced |
| Output Impedance: 7 Ω | |
| Input | 3 V sensitivity |
| RCA and XLR true balanced input | |
| Tube complement | 10 x 6AS7G output tube |
| 6 x 6SN7 driver tube | |
| Gain | 23dB ( for 8 Ω ) |
| Power Bandwidth | 2Hz-75KHz within ½ dB |
| Frequency response | ( 1 watt, open loop ) 20 Hz squarewave Tilt; unmeasureable 1Hz-200KHz within 3 dB |
| Hum and noise | Less than -75db below 1 watt, -95db below full power (30 watts) |
| Distortion | Total Harmonic Distortion ( THD ) typically 1% at full power |
| Intermodulation ( IM ) distortion typically under .04% at full power | |
| Phase shift less than 1° @ 20KHz | |
| Output section | 600 V/µs |
| Feedback | 2 dB |
| Power consumption | 400 watts |
| Dimensions | 13" deep x 17" wide x 8" tall ( 33 x 43 x 20 cm ) |
| Weight | ( without tubes ) 24 lbs ( 10.9 kg ) |
| Warranty | Three year general coverage |
| One year for output tubes | |
