Kategorie: Lautsprecher Inwall


Ausstattungsliste: Tannoy CMS 503DC


Ausstattung & technische Daten
Specification
SYSTEM
Frequency Response (-3 dB) (1) BM Backcan 85 Hz - 50 kHz
Frequency Range (-10 dB) (1) BM backcan model 74 Hz - 54 kHz
Frequency Range (-10dB) (1) PI fitted with backcan 70 Hz - 54 kHz
System Sensitivity (1W @ 1m) (2) 89 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle 90 degrees conical
Power Handling (3) Average: 60 W
Programme: 120 W
Peak: 240 W
Recommended Amplifier Power 120 W @ 16 ohms
Nominal Impedance (Lo, Z) 16 Ohms
Rated Maximum SPL Average: 107 dB
Peak: 113 dB
Transformer Taps (via front rotary switch) 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation
100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation
TRANSDUCERS
Dual Concentric point source driver 1 x 130 mm (5.0”) Dual Concentric driver, using Omnimagnet technology
Low Frequency 35 mm (1.38”) voice coil, treated multi fiber paper pulp cone
High Frequency 20 mm (0.79”) PEI dome
PHYSICAL
Enclosure Backcan: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Blind Mount (BM) Complete with fixed backcan
Pre Install (PI) Separate backcan for pre-installation
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm
Conduit Knockouts on PI Backcan 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
Connectors Removable locking connector with screw terminals with “loop through” facility
Dimensions
Bezel Diameter 205.9 mm (8.11”)
BM Model: Front of ceiling to rear of backcan 188.0 mm (7.40”)
BM Model: Front of ceiling to top of safety loop 205.3 mm (8.08”)
PI Model: Front of ceiling surface to rear of speaker unit 133.3 mm (5.25”)
PI Model: Front of accessory backcan bezel to top of safety loop 153.5 mm (6.04”)
Hole cutout diameter (all models) 190 mm (7.48”)
Net Weight (ea) CMS 503DC BM: 4.10 kg (9.04 lbs)
CMS 503DC PI: 3.1 kg (6.83 lbs)
CMS 503 PI Backcan: 2.6 kg (5.73 lbs)
Included Accessories C Ring Tile bridge Paint mask Cutout template Grille
Optional Accessories Plaster (Mud) ring
Packed Quantity 2
 
Neu im Shop

ePaper Jahres-Archive, z.B. Hifi Test

ePaper Jahres-Archive, z.B. Hifi Test
>> mehr erfahren
462_22882_2
Topthema: Feurig
Feurig_1706536121.jpg
High-End-Standbox mit ESS AMT

Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.

>> Mehr erfahren
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (englisch, PDF, 13.99 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 21.23 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 7.2 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (deutsch, PDF, 7 MB)
Interessante Links:
  • www.hausgeraete-test.de
  • www.heimwerker-test.de
  • hifitest.de/shop/
Allgemeine Händlersuche
Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages