Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CVS 4 Micro
Specification | |
System | |
Frequency Response (-3dB) 1 | 110Hz - 19kHz |
Frequency Range (-10dB) 1 | 90Hz - 22kHz |
System Sensitivity (1W @1m) 2 | 87dB (1W = 2.45V for 6 Ohms) |
Nominal Coverage Angle | 90 degrees conical |
Coverage Angle (1kHz to 6kHz) | 102 degrees conical |
Directivity Factor (Q) | 5.6 averaged 1kHz to 6kHz |
Directivity Index (DI) | 7.1 averaged 1kHz to 6kHz |
Rated Maximum SPL | Average 103 dB, Peak 109 dB |
Power Handling | Average 40 W, Programme 80 W, Peak 160 W |
Recommended Amplifier Power | 80W @ 6 Ohms |
Nominal Impedance | 6 Ohms |
Transformer Taps (via front rotary switch) | |
70V | 15W / 7.5W / 3.5W / 1.9W / OFF & Low Impedance operation |
100V | 15W / 7.5W / 3.75W / OFF & Low Impedance operation |
Distortion | |
10% Full Power | |
250Hz | 2nd Harmonic 0.231% 3rd Harmonic 0.112% |
1kHz | 2nd Harmonic 0.229% 3rd Harmonic 0.253% |
10kHz | 2nd Harmonic 0.163% 3rd Harmonic 0.025% |
1% Full Power | |
250Hz | 2nd Harmonic 0.99% 3rd Harmonic 0.169% |
1kHz | 2nd Harmonic 0.816% 3rd Harmonic 0.027% |
10kHz | 2nd Harmonic 0.444% 3rd Harmonic 0.07% |
Crossover | 2.7kHz |
Transducers | Coaxial |
Low Frequency | 100mm (4.00") mineral loaded cone material |
High Frequency | 19mm (0.75") |
Physical | |
Enclosure | Blind Mount (BM) |
Backcan | Zinc Plated Steel |
Baffle | Reflex loaded UL 94V-0 rated ABS |
Grille | Steel, with weather resistant coating |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design | Security Toggle Clamp |
Cable Entry Options | Cable Clamp & Squeeze connector for conduit up to 22mm |
Connectors | Removable locking connector with screw terminals with "loop through" facility |
Safety Agency Ratings | UL-1480, UL-2043, CE |
Dimensions | |
Bezel Diameter | 213mm (8.39") |
Front of Ceiling to Rear of Backcan | 98.3mm (3.87") |
Front of Ceiling to cable entry centre | 46.5mm (1.83") |
Template hole cutout size | 180mm (7.09") |
Net Weight (ea) | 2.60kg (5.72lbs) |
Included Accessories | C Ring, tile bridge, paint mask, cutout template, grille |
Optional Accessories | Plaster (mud) ring |
305-2128
MD Sound GmbH & Co. KG |