Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein

Kategorie: Lautsprecher Stereo

Ausstattungsliste: Zu Audio Definition Mk.III

Ausstattung & technische Daten
Description High-effi ciency, high-output, fl oor standing loudspeaker featuring Zu’s nano-sanctifi ed full-range high output driver, no crossover or fi lters on full-range driver, complemented by super tweeter.
Deep bass is managed through four 10” Eminence BP-102 bass drivers and driven with internal Hypex™ amplifi cation featuring user adjustable fi lters.
Transformation Service December 2011~ August 2012
Dimensions H W D 49 x 12.8 x 12.5” (124.5 x 32.5 x 31.8cm] // footprint is 12.75” [32.4cm] square
Weight ≈130 pounds [≈59kg] // varies with version of tranformation
Packaged FlexPak foam encapsulated 56 x 21 x 21” [142 x 54 x 54cm] 149 pounds [67kg]
Bandwidth 16-25kHz
Efficiency 101dB SPL @ 1W, 1m
Impedance 8Ω, nominal full bandwidth
Group Delay < 5ms
Acoustic Center 37” [94cm] adjustable via footers and subtle canting of loudspeaker system
Horizontal Listening Window 45°
Vertical Listening Window 15°
Recommend Listening Distance 8 feet [2.5m] or more
Recommended Connector ZuB3 via speakON 8-pole [ZuB3 convention single channel] Zu cable featuring ZuB3 cable technology recommended
Accepted Connectors Via Adapter 1/4” fork spade [6.3mm], oversized 5/16” [8mm] fork spade, bare wire (banana plugs in a pinch)
Internal Cabling ZuEventB3/Def3-A
Power Recommendations 2—8 watt (average room, moderate volume)
8—32 watt (large room, loud listening)
32—90 watt (large room, concert levels)
200 watt (maximum input power)
Amplification Considerations Component Defi nition Mk.III is designed around conventional or parallel mode amps, bridged amplifi ers are not recommended (black speaker negative leg [sp–] of bridged amps will see the virtual ground node of the internal bass amp)
Component Tolerance drivers 0.05% pair matching, 0.01% on electrical components
Tweeter Detail Zu / Eminence APT tweeter // bandwidth: 10k-20kHz
High-Pass Detail 1st order 2x Mundorf Silver/Oil 1uF each, 2uF total
Full-range Driver Array Detail 2x Zu103/ND/G1-16 nanotech full-range driver // bandwidth: 30􀅧12kHz (direct and unfi ltered)
Subwoofer Amp User Adjustments 4x Eminence BP-102 woofers, sealed // bandwidth: 16-90Hz (user adjustable, actively fi ltered)
Subwoofer Amp Type internal Hypex UcD 400-V5 based, high energy toroidal transformer
Subwoofer Amp Input Power 115V (8A max) or 230V (4A max), 50/60Hz (transformer voltage rewire possible, inside case work) 8 watts @ idle
Subwoofer Amp Chassis machined aluminum case work, rack style fi tment allowing in the fi eld service / replacement
Subwoofer Amp User Adjustments Volume // Low-pass Filter Knee // Parametric EQ Gain // Parametric EQ Frequency // Phase
Cabinet MDF or SuperPly
Spike / Feet Insert Thread MDF or SuperPly 3/8–16 TPI, 9/16” hex nut, 14mm wrench can be used
Included With Loudspeaker Pair 4x hard press-on full-range driver covers, installed
8x hard surface stainless ball-end feet / 8x stainless 9/16” [14mm] jam nuts, installed
8x long carpet spikes, 1x connector cleaning kit, 1x fi nish cleaning cloth, 1x owners manual
Loudspeaker Options ZuB3 via speakON 8-pole to Cardas patented binding posts, allowing any cable to be used, grille, custom finish work
Life Expectancy 100 years; cabinet, and drivers, including the Zu 10” drivers; even in direct sunlight
Manufacturers Country Of Origin U.S.A. all parts and labor excluding a few components. Hypex amp modules are made in the Netherlands
Compliances of Directives 60065 | EMC 2004/108/EC | 2006/95/EC | 55103 | RoHS | CE | WEEE | Class-2 subwoofer amplifi er
Warranty & Service 2 years limited—warranty does not cover misuse, abuse, components upstream from the loudspeaker system, modifi cations or non-factory service.
Subwoofer Amplifier Defi nition Mk.III features a built-in subwoofer audio amplifi er. It is a no compromise, state-of-the-art actively fi ltered subwoofer amplifi er that is integrated into the Defi nition Mk.III loudspeaker cabinet, visible on the rear of the loudspeaker.
Subwoofer Amp Type Class D analog switching amp with heavy-duty traditional power supply. Amplifi er module is Hypex DS4 UcD 400-V5.
Dangerous voltages are present inside case during operation. DC output voltage is 50 volts up and down, 100V DC total.
Also know that the case is sealed and requires technical knowledge to open and should only be serviced by a qualifi ed technician. System is not intended for outdoor use, do not expose to rain or moisture.
RECOMMENDATIONS We recommended unplugging your loudspeakers, main amplifi er(s) and other regarded electronics during lightning storms or when the playback system will not be used or for an extended period of time.
Safety Classification Class-2, transformer is also a class-2 double wound isolation toroidal transformer that is switched and fused.
Safety Standards & Compliance 60065 | EMC 2004/108/EC | 2006/95/EC | 55103 | RoHS | CE | WEEE | Class-2 subwoofer amplifi er
Mains AC Power 50/60Hz, 115 or 230 volt (transformer is 115/230V wound and factory wired for your region).
Mains AC Connection C13/C14
User Serviceable Fuse 115V AC mains = 8A | 230V AC mains = 4A
Should the fuse blow replace it with an equivalent part. A spare fuse is located within the fuse holder, located just below the power inlet and only accessible when the power cable is not plugged into the inlet. A small fl at blade screwdriver is required.
Power Consumption 600 watt maximum // 8 watt idle
Damping Factor 500
Self Protection output short-circuit
Input Impedance Speaker Level 500Ω
Infrasonic Filter 12Hz // 24dB/octave butterworth
Adjustable Gain –110dB-0dB
Adjustable High-Pass Filter H 20-120Hz
High-Pass Filter Slope & Character 18dB/octave linkwitz–riley
PEQ Boost Bandwidth 0-+6dB
PEQ Boost 1/2 octave
PEQ Frequency 20-50Hz
Phase 0-180° // 180°-360°
NO BRIDGED MAIN AMPLIFIERS Defi nition Mk.III presents a virtual ground node to the external main amplifi ers’ speaker negative (SP–) output. Bridged amplifiers will see this as a short and self protect.
Do not use bridged amps to drive Defi nition Mk.III loudspeakers. Standard amp types will see an easy 8 ohm load. If main amp does not say BRIDGED there’s nothing to worry about.
Warranty & Service 2-year limited. Zu recommends factory service. Removing the amplifi er from loudspeaker is simple and will not expose the user to danger.
Loudspeaker may still be operated without amplifi er installed, and with satisfactory results. Though Zu and Hypex have designed the electronics to the highest standards of fi delity and durability, shit still happens.
In the event that service is required, Zu offers an amplifi er exchange program so you can quickly get your system back up and running quickly and with minimal hassle.
Folgen Sie uns:
  • facebook - follow us
  • twitter - follow us
  • google - follow us
Interessante Testportale:
  • www.heimwerker-test.de
  • www.hausgeraete-test.de
  • www.spielwaren-check.de
Allgemeine Händlersuche

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages

XODIAC Heimkinowelt GmbH