462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecherkabel
Ausstattungsliste: van den Hul INSPIRATION HYBRID
Ausstattung & technische Daten
| Specification | |
| Cable Type | Screened 5 conductor |
| Conductor Material | FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s) |
| Design Purpose/ Application Area(s) | Highest quality loudspeaker cable / Exotic DIY interconnect |
| Eff. Conductor Ø/Eq. AWG No./Strands | Each signal lead: 1.97 mm² / ~AWG 14 / 98 Ground lead: 0.56 mm² / AWG 19.6 / 7 Screen: 4.45 mm² / AWG 10.7 / 252 |
| External Diameter / -Dimensions | 11.5 mm. |
| Resistance 20 °C / 68 °F | Two red or blue signal leads combined: 1.4 Ohm/100 m. Central ground lead: 3.2 Ohm/100 m. Screen: 0.45 Ohm/100 m. |
| Capacitance | 318 pF/m. |
| Insulation / Dielectric Strength / Test Voltage | Cores: HULLIFLEX ® 4; Jacket: HULLIFLEX ® 4 / 300 Vrms min. |
| Connector Types Suitable | When combining leads into pairs (e.g. as twin lead speaker cable or at amplifier side of bi-wiring cable): |
| Our 5.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 8.3 mm. Ø cable entrance diameter BERRI Bus Connectors; Custom mountable on any length ordered. | |
| For termination of individual leads: | |
| Our 3.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 4.5 mm. Ø cable entrance diameter BERRI Bus Connectors or our DIY Screw-On Speaker Connectors; All custom mountable on any length ordered. | |
| Standard Sales Units / -Lengths | 50 m. reels; With connectors mounted to specifications: any length; Without connectors: please consult your van den Hul dealer or the van den Hul distributor in your country. |
| With connectors mounted the cable is also available in stereo pairs (i.e. two separate cables) in the following standard configurations: | |
| -Bi-amping configuration: Each of both cables having 4 connectors at the amplifier side and 4 connectors at the speaker side. | |
| -Bi-wiring configuration: Each of both cables having 2 connectors at the amplifier side and 4 connectors at the speaker side. | |
| -Normal wiring configuration: Each of both cables having 2 connectors at the amplifier side and 2 connectors at the speaker side. | |
| Jacket Colours Available | Gold tone |
| Remarks | Mounting: |
| -When twin lead wiring a loudspeaker, the two internal red leads should be combined to form the loudspeaker + connection. Likewise, the two blue leads should be combined to form the loudspeaker – connection. | |
| -When bi-wiring or bi-amping a loudspeaker, the first red and blue conductor pair is used to connect one speaker section and the second red and blue conductor pair to connect the other speaker section. | |
| -When ordered with connectors mounted, The INSPIRATION HYBRID comes ready made with a ground lead at each side of the cable: | |
| At the cable end located in the direction of the “van” side of the “van den Hul” cable printing (i.e. at the amplifier side), both the cable shield and the cable’s central ground lead are connected together | |
| and exit as a ground lead, which is to be connected to the power amplifier’s dedicated ground terminal (or chassis). | |
| If it is impossible to connect this ground lead to any ground terminal (or chassis screw) at the amplifier, it can be connected to the amplifier’s “–” (i.e. black) output terminal of the channel in question. | |
| At the cable end located in the direction of the “Hul” side of the “van den Hul” cable printing (i.e. at the loudspeaker side), the cable shield is left disconnected. Here only the cable’s central ground wire exits as a ground lead. | |
| If your loudspeakers are equipped with ground terminals, this ground lead should be connected to the speaker’s ground terminal of the channel in question. | |
| If your loudspeakers are not equipped with ground terminals, this ground lead should be left disconnected. | |
Top Händler
|
262-2322
hifisound Lautsprechervertrieb |
