Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: Perreaux SXV2
General Features | |
Highly Flexible | |
Selectable MM/MC Low-Noise Input Stages | |
Excellent Crosstalk Performance | |
Low Noise Floor | |
Extensive EMI and RFI Filtering | |
Enhanced Audio Design | |
Optimal Circuit and Ground Layout for Improved Noise Floor and Channel Separation | |
Adjustable Gain | |
Selectable RIAA Equalisation Curves | |
Adjustable Load Impedance and Load Capacitance | |
Compact | |
User Controls | |
DIP Switches for Impedance, Capacitance, Gain and RIAA configuration | |
Rear Mounted Power Switch | |
I/O Compliment | |
1 pair Unbalanced Inputs (RCA) | |
1 pair Unbalanced Outputs (RCA) | |
Specifications | |
Rated Output | 0.75VRMS |
Sensitivity | 0.24mV to 7.5mV* |
Gain | 40dB to 70dB* |
Maximum Output | 7.9VRMS |
Input Overload Margin | 20dB |
Load Impedance | 10Ω to 47kΩ* |
Load Capaitance | 27pF to 417pF* |
Total Harmonic Distortion (THD+N) | Typically: 0.002% @ 1kHz** |
20Hz to 20kHz: <0.01%** | |
Signal to Noise Ratio (unweighted) | 85dB** |
RIAA Equalisation | IEC or Normal* |
RIAA Accuracy | ±0.5dB, 20Hz-20kHz |
Output Impedance | 27Ω |
Dimensions | Width 216mm (8.5") |
Height 58mm (2.3") | |
Depth 168mm (6.6") | |
Weight | 1.5kg (3.3lb) |
Note: | *User selectable |
**Measurements taken with lowest gain setting |