462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Grace Design m906
Ausstattung & technische Daten
| Technical Specifications | |
| 5.1 reference monitor controller | |
| ANALOG INPUT THD+N @ 0dB gain, 1kHz | |
| +20dBu out | <0.001% (0.00075% typical) |
| +10dBu out | <0.003% (0.001% typical) |
| 0dBu out < | <0.009% (0.005% typical) |
| Intermodulation Distortion SMTPE/DIN 4:1 50Hz, 7kHz | |
| @+20dBu out | <0.002% (0.0015% typical) |
| @ 0dBu out | <0.008% (0.006% typical) |
| Frequency Response | |
| +/-3dB | 3Hz - 250Khz |
| Dynamic Range | |
| 20-22kHz bandwidth | 112dB |
| 20-22kHz bandwidth and A weighting filter | 115dB |
| Output Noise 20-22kHz bandwidth, -20dB gain | |
| High gain mode | -89dBu |
| Low gain mode | -98dBu |
| Output Noise 20-22kHz bandwidth and A weighting filter, -20dB gain | |
| High gain mode | -91dBu |
| Low gain mode | -99dBu |
| Phase Deviation | |
| 20Hz to 20kHz | < 4 |
| 10Hz to 100kHz | < 15 |
| Crosstalk any channel | |
| 100Hz | < 100dB |
| 1kHz | < 100dB |
| 20kHz | < 85dB |
| Balanced Input CMRR | |
| 60Hz | > 65dB |
| 1kHz | >65dB |
| 10kHz | >60dB |
| Gain Range | |
| Low gain mode (0.5dB steps) | -105.5dB to +20dB |
| High gain mode (0.5dB steps) | -95.5dB to +30dB |
| Channel Tracking Accuracy | |
| Any channel | +/-0.05dB |
| Maximum Output Level | |
| Low gain mode (balanced) | +15dBu |
| High gain mode (balanced) | +27dBu |
| Maximum Input Level | |
| Balanced inputs | +30dBu |
| Unbalanced inputs | +20dBu |
| Impedances | |
| Balanced inputs | 30k Ohms |
| Unbalanced inputs | 50k Ohms |
| Balanced outputs | 300 Ohms |
| Minimum load impedance | 300 Ohms |
| DIGITAL TO ANALOG CONVERTER FIXED OUTPUTS | |
| Output Levels | |
| User selectable (0dBFS) | +16dBu / +24dBu |
| Fixed output trim range (0.5dB steps) | -95.5dB to +30dB |
| THD+N | |
| 1kHz, -1dBFS, 20-22kHz bandwidth (44.1kHz) | 0.00% |
| Dynamic Range | |
| 20-22kHz bandwidth | >111dB |
| Input Lock Range | |
| AES3/SPDIF | 32kHz to 192kHz |
| TOSLINK | 32kHz to 96kHz |
| ADAT LIGHTPIPE | 30kHz 55kHz |
| S-Lock Sample Clock Intrinsic Jitter | |
| 20-22kHz bandwidth | <25ps |
| S-Lock Sample Clock Jitter Rejection | |
| 1kHz sine jitter | -40dB |
| S-Lock Supported Sample Rates | |
| AES3, SPDIF | 44.1, 48, 88.2, 96, 176.4, 192kHz |
| TOSLINK | 44.1, 48, 88.2, 96kHz |
| ADAT LIGHTPIPE | 44.1, 48kHz |
| s-Lock™ Capture Range | |
| 44.1, 48kHz | +/- 10Hz |
| 88.2, 96kHz | +/- 20Hz |
| 176.4, 192kHz | +/- 40Hz |
| Word Clock / Superclock Input | |
| Impedance (switchable) | 75 Ohms / 1M Ohms |
| Minimum Voltage | 3V peak to peak |
| Maximum Voltage | 5V peak to peak |
| Word clock frequencies supported | 44.1, 48, 88.2, 96, 176.4, 192kHz |
| Superclock frequencies supported | 11.2896MHz, 12.288MHz (256x fs) |
| POWER SUPPLY / MECHANICAL SPECS | |
| Power consumption | 60W |
| Input Voltage 50-60Hz | 100, 120, 220, 230-240VAC |
| Dimensions | |
| Main chassis IEC 2U | 3.5" x 10.5" x 17" |
| Remot control unit | 1.6" x 8" x 5.25" |
| Power supply unit | 1.7" x 8.5" x 8.5" |
| Weight | |
| Main chassis | 14.1lbs / 6.4kg |
| Remote control unit | 2.3lbs / 1kg |
| Power supply unit | 6.5lbs / 2.9kg |
