Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Tonabnehmer
Ausstattungsliste: van den Hul COLIBRI XCP-HO & XCM-HO
Specification | |
XC-HO Version | (X = cross shaped modulator, C = matched crystal Copper wire coils, HO = High Output) |
- High output, most suitable for jazz music | |
- Output voltage: 0.30mV/channel | |
- Types available: XCP-HO and XCM-HO (P and M type suffix ) | |
Stylus Replacement Available | Stylus replacement and other services available on request |
Stylus Shape | VDH - IS |
Stylus Radii | 2 x 85 Micron |
Frequency Range | 5 - 65.000 Hz |
Tracking Force | 13.5 - 15 mN. Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance. |
Static Compliance | 35 Micron/mN. Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance. |
Tracking Ability at 15mN at 315Hz | 70 Micron |
Output Voltage at 1 kHz at 5.7 cm/s eff. | 0.30 mV RMS |
Channel Unbalance | < 0.5 dB |
Channel Separation at 1kHz / 10kHz | > 35 / > 30 dB |
Equivalent Stylus Tip Mass | 0.24 Milligram |
System Weight | 8.2 Gram |
P and M type suffix: Each of the three above mentioned main versions of The COLIBRI are available with either: - A regular carbon-nylon plastic body. Total cartridge weight is 6 gram. Suitable for arms with an effective tone arm mass of 8 gram to 14 gram. | |
- A metal body. Total cartridge weight is 7 gram. Suitable for arms with an effective tone arm mass of 10 gram to 14 gram. The metal bodied version carries the -M suffix in its name. | |
Vertical Tracking Angle | 22 Degrees |
Optimum Load Capacitance | Non critical |
Recommended Load Impedance | 500 - 1000 Ohm |
Recommended Eff Tone arm Mass | Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance. |
P and M type suffix: Each of the three above mentioned main versions of The COLIBRI are available with either: - A regular carbon-nylon plastic body. Total cartridge weight is 6 gram. Suitable for arms with an effective tone arm mass of 8 gram to 14 gram. | |
- A metal body. Total cartridge weight is 7 gram. Suitable for arms with an effective tone arm mass of 10 gram to 14 gram. The metal bodied version carries the -M suffix in its name. | |
The cartridge has been optimized regarding an EFFECTIVE tone arm mass of 11 - 12 gram. Heavier arms CAN produce tracking and resonance problems and arms with an effective mass exceeding 16 gram WILL CERTAINLY! | |
Please note that an extremely short cantilever and a high tracking ability and heavy arms DUE TO PHYSICS will never yield a happy marriage. | |
Moving Coil Resistance per channel | 96 Ohm +/- 10% |
262-2322
hifisound Lautsprechervertrieb |