Händlersuche

Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihr PLZ-Gebiet oder wählen Sie ein Land:

Österreich
Schweiz

Newsletter

Abonniere den Newsletter und erhalte Informationen über neue Magazine, exklusive Spezial- angebote, Gewinnspiele, neue Features sowie limitierte Angebote unserer Partner.

Newsletter abbestellen

> > VAN DEN HUL CONDOR XGP-MO & XGM-MO
Ausstattungsliste

Kategorie: Tonabnehmer

VAN DEN HUL CONDOR XGP-MO & XGM-MO

VAN DEN HUL CONDOR XGP-MO & XGM-MO

Ausstattungsliste und technische Daten

van den Hul CONDOR XGP-MO & XGM-MO
Specification
The cartridge has been optimized regarding an EFFECTIVE tone arm mass of 12 - 20 gram. Heavier arms CAN produce tracking and resonance problems and arms with an effective mass exceeding 24 gram WILL CERTAINLY!
P and M type suffix: Each of the above mentioned versions of The CONDOR are available with either:
Optimum Load Capacitance Non critical
Stylus Shape VDH - IS
- Types available: XGP-LO and XGM-LO (P and M type suffix)
System Weight P and M type suffix: Each of the above mentioned versions of The CONDOR are available with either:
- A metal body. Total cartridge weight is 9.25 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The metal bodied version carries the -M suffix in its name.
- Output voltage: 0.25 mV/channel
Frequency Range 5 - 55.000 Hz
Channel Separation at 1kHz / 10kHz > 36 / > 30 dB
Moving Coil Resistance per channel 36 Ohm +/- 10%
- A metal body. Total cartridge weight is 9.25 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The metal bodied version carries the -M suffix in its name.
- A regular carbon-nylon plastic body. Total cartridge weight is 8.75 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The plastic bodied version carries the -P suffix in its name.
- A regular carbon-nylon plastic body. Total cartridge weight is 8.75 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The plastic bodied version carries the -P suffix in its name.
Output Voltage at 1 kHz at 5.7 cm/s eff. 0.35 mV RMS
Tracking Force 13.5 - 15 mN. Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance.
Recommended Eff Tone arm Mass Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance.
Tracking Ability at 15mN at 315Hz 70 - 80 Micron
- Low output, most suitable for classical music
Static Compliance 35 Micron/mN. Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance.
Equivalent Stylus Tip Mass 0.32 Milligram
Stylus Replacement Available Stylus replacement and other services available on request
XG-LO Version (X = cross shaped modulator, G = matched crystal Gold wire coils, LO = Low Output)
Vertical Tracking Angle 22 Degrees
Channel Unbalance < 0.3 dB
Recommended Load Impedance 500 (> 200) Ohm
Stylus Radii 2 x 85 Micron
Fotostrecke schliessen
VAN DEN HUL CONDOR XGP-MO & XGM-MO - Fotostrecke
hifitest.de Bildergalerie

Diese Tests könnten Sie ebenfalls interessieren

Datum Im Test Kategorie Bewertung Tester
24.11.2014
09:56
tonabnehmer_shelter_501_mk_iii_bild_1416410401.jpg Shelter 501 Mk III
Tonabnehmer Keine Bewertung
Thomas Schmidt
03.08.2014
10:20
tonabnehmer_eat_yosegi_bild_1406122629.jpg EAT Yosegi
Tonabnehmer Keine Bewertung
Holger Barske
18.06.2014
17:08
tonabnehmer_lyra_etna_bild_1402494972.jpg Lyra Etna
Tonabnehmer Keine Bewertung
Holger Barske
11.03.2014
13:33
tonabnehmer_shelter_901_iii_spezial_bild_1394012858.jpg Shelter 901 III Spezial
Tonabnehmer Keine Bewertung
Thomas Schmidt
05.03.2014
13:23
tonabnehmer_charisma_audio_mc_1_bild_1393934221.jpg Charisma Audio MC-1
Tonabnehmer Keine Bewertung
Thomas Schmidt