Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Harman Kardon HK 3490
Ausführliche Produktinformationen | |
Audio Specifications and Features | |
Stereo Power | 120 x 2 |
Amplifier Type | High-current capability, ultrawide-bandwidth amplifier design with low negative feedback |
High Instantaneous Current Capability | 45 Amps |
Power Bandwidth | 20Hz – 20kHz |
Ultrawide Bandwidth Design @ 1W (+0dB / –3dB) | 10Hz – 110kHz |
Signal-to-noise Ratio (IHF-A) | 95 dB |
Slew Rate | 40V/µsec |
Input Sensitivity/Impedance | 200mV/47k ohms |
Dolby® Virtual Speaker | 1 |
Headphone Mode | Dolby® Virtual Speaker |
Audio Connectivity Features | |
Digital Audio Input (Coax / Optical) | 1-1 |
Analog Audio Input (Rear) | 6 |
Analog Audio Input (Front) | 1 |
Phono Input | 1 |
Preamp Outputs/Main Amp Inputs | 1-1 |
Record Outputs | 1 |
Subwoofer Output | 1 |
Headphone Output | 1/4" Jack |
iPod® Connectivity | Bridge Ready |
A/B Speaker Switching | 1 |
Speaker Terminals | 2 Sets |
Video Connectivity Features | |
Video Inputs (Rear/Front) | 3-1 |
Video Outputs | 1 |
Data Connectivity Features | |
Turn-On Trigger Connections | 2 |
Software Update Port | Yes |
IR In / Out Connections | 1-1 |
Remote Control Features Remote Preprogramming | |
Remote Preprogramming | 1 |
System Remote Type | IR |
FM Tuner Specifications | |
Usable Sensitivity (IHF) | IHF 1.3µV/13.5dBf |
Signal-to-Noise Ratio (Mono/Stereo) | Mono/Stereo 73/72dB |
Distortion (Mono/Stereo) | Mono/Stereo 0.3/0.4% |
Stereo Separation @ 1kHz | 40 dB |
Selectivity ±400kHz | 65 dB |
Image Rejection | 80 dB |
IF Rejection | 100 dB |
Preset Stations | 30 preset station |
Direct-Access Tuning | Yes |
AM Tuner Specifications | |
Frequency Range kHz | 522 kHz |
Signal-to-Noise Ratio | 40 dB |
Usable Sensitivity (Loop) | Loop 500µV/M |
Selectivity | 1kHz, 50% Mod 0.8% |
Distortion | ±9kHz, >25dB |
Other Features | |
Sleep Timer | Up to 90 min |
Detachable IEC Power Cord | 1 |
General Specifications | |
Power Requirement | AC 230V, 50 Hz |
Power Consumption (full power/idle) | 1W standby, 310W maximum |
Switched Accessory AC Outlets | 2- 220-230v 50/60Hz 100W, .5A MAX |
Dimensions (H x W x D – Metric/English) | 165mm x 440mm x 382mm |
Weight (Metric/English) | 10,4kg |