390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: Alpha Design Labs ADL GT40
- GT40 has no setting for gain to match different impedance headphones. We recommend using 16 ohm to 300 ohm impedance headphones.
- IMPORTANT NOTE FOR RECORDING:
- The TENOR chip used in the GT40 has a bandwidth limitation of 12Mbps (USB 2.0 full speed operation), and due to this limitation only one I2S input or output can be set for 24bit/96KHz application at one time. Therefore, under this condition, for simultaneous multiple-channel applications other I2S interfaces must be configured at 16-bit/48KHz or 16-bit/96KHz. In other words, when recording it is necessary to set the audio Input on the computer to 24bit/96KHz (PC-Sound application; MAC-MIDI application), but do not set not the audio Output to 24bit/96KHz. The Output should be set to a lower 16bit resolution until recording is done. Then when you want to playback your 24bit/96KHz files through the GT40 you need to reset the output to 24bit/96KHz and reset the input to a 16bit resolution.
Ausstattung & technische Daten
| USB & Analog Playback and Record multimedia audio system | |
| Connectivity | USB B Interface, Analog input/output RCA jack |
| USB Playback Resolution | 24bit/96KHz |
| USB Recording Resolution | 96kHz (Max) supports 32kHz/44.1kHz/48kHz |
| Frequency response | 20Hz ~ 20kHz (40Hz: +0.5 dB, 15kHz:-0.5dB) |
| SN ratio | -90dB (A-wtd) / Line Output |
| Line Output Level | 1 Vrms |
| Line Input Level | MC 0.4mV / MM 5mV / Line 1V |
| Headphone Output Level | 80mW ( 32 ohm ) Max. |
| Power Supply AC Adaptor Rating | AC 9V 0.5A |
| Dimensions | 150 (W) x 111 (D) x 57 (H) mm |
| Weight | 785g Approx. |
| The load (Input impedance) for the ADL GT40 is as follows | |
| Line 50K ohm Approx. | |
| MM 46K ohm Approx. | |
| MC 10K ohm Approx. | |
| Maximum Input Level for MM | 5.0mVrms at 1K Hz |
| Maximum Input Level for MC | 0.4mVrms at 1K Hz |
| Maximum Input Level for LINE | 1Vrms at 1K Hz |
| The Gain setting for the ADL GT40 is fixed at 62.5dB for MC and fixed at 48.5dB for MM. | |
| (MC input to LINE output) => 62.5dB @ 1K Hz , +6dB(Line) | |
| (MM input to LINE output) => 48.5dB @ 1K Hz , +6dB(Line) | |
