390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 401DCe
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) | 110Hz - 50kHz |
| Frequency Range (-10dB) (1) | 80Hz - 54kHz |
| System Sensitivity (1W @1m) (2) | 88dB (1W = 2.45V for 6 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1kHz to 6kHz) | 123 degrees |
| Directivity Factor (Q) | 4.6 averaged 1kHz to 6kHz |
| Directivity Index (DI) | 6.0 averaged 1kHz to 6kHz |
| Rated Maximum SPL | Average: 106dB Peak: 112dB |
| Power Handling (3) | Average: 60W Programme: 120W Peak: 240W |
| Recommended Amplifier Power | 120W @ 8 Ohms |
| Nominal Impedance | 8 Ohms |
| Transformer Taps (via front rotary switch) | 70V: 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation 100V: 30W / 15W / 7.5W / OFF & Low Impedance operation |
| Crossover | 2.5kHz - 2nd order LF, 2nd order HF (with dynamic HF protection) |
| TRANSDUCERS | |
| Low Frequency | 1 x 100mm (4.00") Dual Concentric™ constant directivity driver with multi fibre paper pulp cone |
| High Frequency | 19mm (0.75") titanium dome with neodymium magnet system |
| PHYSICAL | |
| Enclosure | Back Can: Reflex loaded UL 94V-0 rated ABS Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Back Can | Complete with fixed backcan |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Hole Cutout Diameter | 187mm (7.36") |
| Dimensions | Bezel diameter: 205mm (8.07") Front of ceiling to rear of pod: 147.60mm (5.81") |
| Net Weight (ea) | 2.725kg (6.00lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Clamping Design | Min / Max Clamping Range: 0.0mm (0.0") / 20.0mm (0.79") Recommended Clamp Torque: 1.5Nm |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
