Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Tannoy Revolution Signature DC4T
Specifications | |
PERFORMANCE | |
Recommended amplifier power | 20 - 125 Watts RMS |
Continuous power handling | 62 Watts RMS |
Peak power handling | 250 Watts |
Sensitivity (2.83 Volts @ 1m) | 87 dB |
Nominal Impedance (Ohms) | 8 |
Frequency response | 55Hz - 54kHz (-6dB) |
Dispersion | 90 degrees conical |
DRIVE UNITS | |
Dual Concentric™ High Frequency | 19mm (0.75”) titanium dome with Tulip WaveGuide™ |
Dual Concentric™ Low Frequency | 100mm (4.00”) treated paper pulp cone with rubber surround and 33mm (1.33”) edge wound voice coil |
Bass driver | 100mm (4.00”) treated paper pulp cone with rubber surround and 33mm (1.33”) edge wound voice coil |
CROSSOVER | |
Crossover Frequency | 1.5kHz |
Crossover Type | Passive low loss 2nd order LF, 1st order HF |
CABINET | |
Enclosure type | Front ported |
Dimensions | 850 x 169 x 175mm (H x W x D ex. grille) 33.46 x 6.65 x 6.89” (H x W x D ex. grille) |
Volume | 10.5L 0.37 cu. ft. |
Weight | 10.5kg 23.15lbs |
Finish | Light oak and Espresso |
305-2128
MD Sound GmbH & Co. KG |