390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Von Schweikert VR-11SE Mk2
Ausstattung & technische Daten
| Specifications | |
| System Type | Dynamic-driver six-way system using acoustic suspension and three-piece stacking enclosure system; adaptive room correction unit supplied for accurate sound in any environment. |
| Woofer Tuning | Acoustic suspension design yielding the tightest mid-bass and sub-bass reproduction possible, without the added problem of “one note bass”, often associated with vented designs. |
| Large subwoofer cabinet design enables accurate sub-bass reproduction down to 10Hz. The dual 15″ subwoofers, located on the rear of each cabinet, are driven by an onboard 1,000 watt amplifier. | |
| These amplifiers employ adjustments to compensate for varying room conditions. See owners manual for details. | |
| Cabinet and Bracing | A two-inch thick front baffle, sidewalls, and rear baffle provides exceptional vibration control and image solidity, while one-inch HDF interlocking braces provide exceptional rigidity and freedom from boxy colorations. |
| The internal damping consists of thick acoustic felt lining, foam and Dacron stuffing to eliminate cavity resonances. Large casters are provided for ease of movement. | |
| Size (per channel) | Height: 90″, Width Front: 11″, Width Rear: 21″, Depth: 30″. |
| Weight (per channel) | Woofer module (x2): 268 lbs each, M/T module: 157 lbs., Total Weight Per Channel: 693 lbs. |
| Driver Complement (per channel) | 15″ Kevlar-Nomex honeycomb woofers (x2), 8.5″ magnesium mid-basses (x4), 7″ carbon Kevlar-cellulose Aerogel midrange drivers (x2), 1.5″ dual-concentric silk ring tweeters (x2), |
| 5″ aluminum ribbon supertweeters (X2). All drivers use a proprietary Advanced Motor System with low distortion design. | |
| Crossover | Proprietary film and foil capacitors, air-core inductors, military-spec film-foil resistors. Crossover points and architecture are classified. |
| Binding Posts | Three sets of five-way terminal posts enabling tri-wiring. Single wire can be used direct to M/T with jumpers to the woofer cabinets. |
| Ambience Driver | Rear-firing 5″ aluminum ribbon. Ambience circuit uses Dimensional Control (effects level) to compensate for room acoustics and soundstage depth. |
| Provides a Global Axis polar response pattern to simulate live musical reproduction. | |
| Fine Tuning Adjustments | Subwoofer level control and frequency tuning variable from 50Hz to 100Hz (set flat at 75Hz, volume at 10 o’clock). |
| Front tweeter level control adjustment centered at 4kHz with 3dB gain and 18dB cut. Front supertweeter level control adjustment centered at 20kHz with 16dB gain and 5dB cut. | |
| Subwoofer Amplifier Power | 1000 watts rms Class D technology. (one amplifier powers each subwoofer). System total is 4000 watts rms, 8,000 watts peak. |
| Frequency Response | 10-100 kHz, +/- 6 dB (16-50 kHz +/- 3 dB) |
| Impedance | 8 ohms avg. (5 ohm dips between 200Hz-300 Hz and 6kHz-12kHz). |
| Recommended Power | 20 watts up to 1000 watts (music power). |
| Sensitivity | 96 dB @ 1w/1m using 2.83 v. (99 dB with subwoofer and supertweeter boost settings). |
| Finishes | Hi-Gloss Piano Black. Premium finishes available, please call for quotation. |
