462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Linn Majik-I
Ausstattung & technische Daten
| Integrated amplifier | |
| Technical Specifications | |
| Date of Introduction | October 2007 |
| Type | Integrated amplifier |
| Connector types | |
| Headphones | 3.5 mm jack |
| Aux input | 3.5 mm jack |
| Line outputs | RCA Phono |
| Tape outputs | RCA Phono |
| Line inputs | RCA Phono |
| Speaker outputs | 4mm Banana / Binding Post |
| Input impedance | |
| MM phono input | 48 kΩ 68 pF |
| Line inputs | 10 kΩ |
| Aux input | 100 kΩ |
| Input voltage | |
| MM phono input | 70 mV peak @ 1 cm/sec 1kHz |
| Line inputs | 8.5 V peak, 6 V rms |
| Aux input | 4.5 V peak, 3.1 V rms |
| Phono stage gain | |
| MM phono input | +40 dB (x 100) @ 1 kHz |
| Output impedance | |
| Line out | 300 Ω |
| Tape out | 300 Ω |
| Headphones | 11 Ω |
| Output voltage | |
| Line outputs | 8.8 V peak, 6 V rms |
| Tape outputs | 8.8 V peak, 6 V rms |
| Headphones | 8.8 V peak, 6 V rms |
| Output offset | |
| Line outputs | < 2 mV |
| Tape outputs | < 2 mV |
| Headphones | < 2 mV |
| Speaker outputs | < 3 mV |
| Signal-to-noise ratio | |
| Line inputs | Better than -120 dB |
| MM phono input | Better than -90 dB |
| Gain range | -80 dB to +20 dB |
| Gain resolution | 0.5 dB |
| Unity gain volume | 0 dB = volume 80 |
| Dynamic range | 120 dB |
| Damping factor | Greater than 170 |
| Signal level for clipping | 755 mV rms |
| Harmonic distortion | < 0.01% |
| Load tolerance | Unconditionally stable into all loudspeaker loads |
| Frequency response | |
| Pre-amp | 2.5 Hz – 170 kHz (-3 dB) |
| Power amp | 2.5 Hz – 48 kHz (-3 dB) |
| Speaker output voltage | 28.8 V peak |
| Power consumption | |
| Standby | 20 W |
| Operational | 30 W |
| Maximum continuous | 300 W |
| Mains supply voltage (auto-ranging) | 100 – 120 V ac (±10%) 50 – 60 Hz, 220 – 240 V ac (±10%) 50 – 60 Hz |
| Fuse replacement | 250 V, T10 A |
| Dimensions | (H) 80 mm x (W) 381 mm x (D) 355 mm (H) 31⁄8 inches x (W) 151⁄16 inches x (D) 14 inches |
| Weight | 4.9 kg / 10.78 lb |
| Control | 6 control keys on front panel Remote controllable (handset supplied) |
| Finishes | Black and Silver |
