Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKenwoods brandneue Multimedia-Headunit bringt nicht nur einen riesigen 10,1-Zoll-Bildschirm mit, sondern auch eine speziell auf Wohnmobile zugeschnittene Navigation.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Von Schweikert Unifield Three Mk2
Specifications | |
System Type | Dynamic-driver “augmented one-way” system utilizing a full range driver for “image lock” supported by a subwoofer and ribbon super tweeter. |
Woofer Tuning | The triple-chambered transmission line is a hybrid design composed of three separate chambers coupled to the room by a tuned vent at 32 Hz. The chamber filling is acoustic foam and Dacron. |
The 2″-wide vent tube with 3″ flare extends bass response without the “one note bass” problem found in other ported systems. Dynamic range, transient response, and bass clarity are state-of-the-art. | |
Cabinet and Bracing | A triple-layer cabinet with 50mm thick walls is formed of 20mm resin-board, 20mm composite stone, and a 10mm felt layer bonded with vibration-controlling adhesive, providing exceptional transparency and image focus. |
Internal honeycomb bracing consists of 20mm MDF fiberboard interlocked shelves, providing exceptional rigidity and freedom from boxy colorations. | |
The internal damping consists of high density crimped Dacron stuffing to eliminate cavity resonances, eliminating “one note boom.” A dedicated stand is provided. | |
Size (per channel) | Height: 40″ (with stand), Width: 10″, Depth: 14″. |
Weight (per channel) | Woofer module: 47 lbs each, M/T module: 14 lbs., Stand: 8 lbs. Total shipping weight with cartons: 190 lbs complete. |
Driver Complement (per channel) | 7″ magnesium-coned woofer with Low Distortion Motor from Norway, 5″ composite-coned full-range driver from Japan, and 3″ aluminum foil ribbon tweeter. |
All driver diaphragms were designed for ultimate transparency and feature a very high Young’s Modulus (ratio of weight to stiffness), along with a matched transient response speed for breath-taking sonic integration. | |
Crossover | Global Axis Integration Network (our proprietary design that eliminates “beaming”) set at 100 Hz and 8 kHz (trailing slope @ -6dB, 300Hz/4kHz overlap). |
Optimized for flat off-axis response and phase consistency. | |
Very high quality parts are used from France, Germany, and the U.S., including proprietary film-foil capacitors, low distortion inductors, film-foil resistors, and high purity copper wiring. | |
Decoupling System | The front baffles as well as the drive units are mechanically isolated from the main cabinets with a proprietary iso-elastic (non drying clay) gasket. |
Combined with the triple-laminate wall construction, this technology is the latest word in distortionless cabinet design, not found elsewhere at any price. | |
Binding Posts | Double sets of five-way rhodium posts enabling bi-wiring. |
Frequency Response | 26Hz-50kHz -6 dB (32Hz-40 kHz, +/- 2 dB) |
Impedance | 8 ohms nom. (4 ohms lowest) |
Recommended Power | 20 watts (quiet listening) up to 300 watts music power. |
Sensitivity | 88 dB @ 1w/1m using 2.83V. |
Finishes | Hi-Gloss Black paint or medium cherry veneer. |