Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: Rega Fono MC
Key Features | |
Dedicated moving coil phono stage | |
Simple connectivity and operation | |
Fully adjustable via DIP switches via rear panel | |
MUSE operational amplifier used in RIAA equalization amplifer | |
Two selectable gain settings | |
Default factory settings matched for all Rega MC models | |
Specification | |
Output Impedance | 200 Ω |
Recommended Minimum Output Load Resistance | 5 k |
Frequency Response (50 kΩ Output Load) | 13 Hz (-3 dB) to 100 kHz (-0.3 dB) |
RIAA Accuracy (50 kΩ Output Load) | Better than ±0.2 dB 100 Hz to 100 kHz |
Power Requirements | 24 V AC at 150 mA maximum |
Load settings for adjustable MC stages | |
Input Sensitivity (for 200 mV Output) | 4 off = 133 uV / 4 on = 67 uV |
Input Loading Resistance | 1 and 2 off = 400 Ω / 1 on = 100 Ω / 2 on = 150 Ω / 1 and 2 on = 70 Ω |
Input Loading Capacitance | 3 off = 1000 pF / 3 on = 4300 pF / Gain (at 1 kHz) / 4 off = 63.5 dB / 4 on = 69.5 dB |
Maximum Input Level (at 1 kHz) | 4 off = 6.7 mV / 4 on = 3.4 mV |
Factory settings for all Rega MC cartridges | Impedance 100 Ω / Capacitance 1000 pF / Gain Setting High |