Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: VAC Signature Mk IIa SE
Technical specification | |
Gain | 12 dB |
Inputs | 3 sets RCA line input |
2 sets balanced/RCA selectable inputs | |
set RCA cinema bypass input | |
Optional 1 MM and 1 MC (or additional line input if phono is not fitted) | |
Outputs | 2 sets RCA |
2 sets balanced XLR (EIA “pin 2 hot” studio standard) | |
Tubes | 2x 8416, 7308, 6922, E88CC, ECC88, 6DJ8, (or 12DJ8 twin triodes) |
Absolute Phase | correct from all inputs to all outputs |
Frequency Response | Flat over audio band –3 dB bandwidth 5 Hz – 210 kHz |
THD | <0.009% @ 1 kHz, 1 V RMS |
Maximum Output | < 8 V RMS |
Output Impedance | < 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback) |
Maximum Input | Infinite signal (attenuation precedes the gain circuitry) |
Recommended Output Load | > 300 ohms |
Power | External power supply, detachable umbilical cable, detachable IEC power cord |
Cinema Bypass | Yes |
Voltage | May be ordered for 100v, 120v, 220v, or 230/240v operation |
Remote Control | included |
Illumination | Illuminated logo may be switched off |
Finish | Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard. |
Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost. | |
Dimensions (H x W x D) | Audio chassis (not including knobs and connectors): 5.5" x 18" x 14.5" (14 cm x 45.7 cm x 36.8 cm) |
Power supply (not including connectors): 4.3" x 18" x 14.5" (10.9 cm x 45.7 cm x 36.8 cm) | |
Shipping Weight | With phono: 61 lbs. (27.7 kg.) |
Phono Stage (optional) | |
Tubes | 6x 12AX7 |
Gain | 44 dB MM |
64 dB MC | |
Frequency Response | RIAA standard +/- 0.2 dB (20 Hz - 20 kHz) -3 dB bandwidth 10 Hz - • 80 kHz |
Channel Separation | > 80 dB @ 1 kHz |
Maximum Input | > 130 mv @ 1 kHz, MM |
> 13 mv, MC | |
MC Load Impedance | selectable, 470, 300, 250, 200, 150, and 100 ohms |
MM Load Impedance | selectable, 47k, 30k, 25k, 15k, and 10k ohms |
Overload | 117MV @ 1kHz = 8 volts RMS output; 460MV @ 10kHz |
Residual Noise | Less than 3MV at output (s/n ratio greater than approx. 69db) |