390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VXNET 12
Ausstattung & technische Daten
| Performance | |
| System Type | Full Range - Vented |
| Frequency Response (-3 dB) (1) | 70 Hz - 25 kHz |
| Frequency Range (-10 dB) (1) | 55 Hz - 38 kHz |
| Rated Maximum SPL (2) | Average: 121 dB |
| Peak: 127 dB | |
| Dispersion (-6 dB) | 90 degrees conical |
| Driver Complement | 1 x 300 mm (12") Dual Concentric |
| Crossover (DSP Generated) | 1.5 kHz and variable high pass filter for use with subwoofers |
| Directivity Factor (Q) | 9.6 averaged 1 kHz to 8 kHz |
| Directivity Index (DI) | 9.8 averaged 1 kHz to 8 kHz |
| Distortion | |
| 10% Full Power (12.7 V) | 2nd Harmonic 250 Hz: 0.52%, 1 kHz: 0.298%, 10 kHz: 3.58% |
| 3rd Harmonic 250 Hz: 0.58%, 1 kHz: 0.63%, 10 kHz: 0.19% | |
| 1% Full Power (4 V) | 2nd Harmonic 250 Hz: 0.14%, 1 kHz: 0.38%, 10 kHz: 1.02% |
| 3rd Harmonic 250 Hz: 0.26%, 1 kHz: 0.58%, 10 kHz: 0.03% | |
| Electronics | |
| Efficiency | >85% typically |
| Damping Factor | 120 ref 8 Ohms |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 5.6 kOhms (unbalanced) |
| 11.2 kOhms (balanced) | |
| Input Sensitivity | 1.4 V (+5.5 dBu) |
| System Type | Dual channel Class D (Bridged) |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Automatic (115 / 230 V, 45 - 65 Hz) |
| System Type | High current, high frequency switch mode |
| Efficiency | >90% typical |
| Input voltage | 100 V / 115 V / 230 V nominal +/-10% |
| Mains fuse | External |
| Fuse type | T10AT |
| Other features | Automatic soft start |
| DSP System | |
| Comms Facilities | Firmware updatable and selected parameters editable |
| Communications | Serial - RS485 Proprietary message format |
| Dynamic Range | 112 dB (A) typical |
| DSP | 3rd generation SHARC |
| Sampling Frequency | 96 kHz 24 bit A/S-D/A word length |
| Format | 1 IN - 2 OUT |
| Construction | |
| Enclosure | 36.4 litre, 15 mm (enclosure) and 18 mm (front) birch plywood, vented and internally braced |
| Finish | Textured black or white paint (custom colours on request) Powder coated perforated steel grille Airnet cloth behind |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) 1 x RJ45 (network link) 1 x Neutrik Powercon |
| Controls & Indicators | LED on front of cabinet behind grille (wink indicator for locating & assigning) Power LED (blue) Signal LED (green) Limit LED (red) User DSP - defeat switch Power switch |
| Dimensions (H x W x D) | 486 x 370 x 360 mm |
| Weight | 17 kg |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
