Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: CD-Player
Ausstattungsliste: ATC CDA2
CD PLAYER | |
Distortion: 1kHz < 0.0015% (-96dB) 10kHz < 0.003% (-90dB) | 1kHz < 0.0015% (-96dB) |
10kHz < 0.003% (-90dB) | |
Frequency Response (20Hz–20kHz) | +/- 0.2dB |
PRE-AMPLIFIER | |
Frequency Response (-3dB) | < 2 Hz – > 280 kHz |
Distortion (1kHz) | <0.0008% / 102dB |
Input sensitivity for 2V Output | Aux inputs 600mV 3.5mm inputs 400mV |
Maximum Output Level | Phono 9.2V r.m.s XLR 18.4V r.m.s. |
Overload Capacity | 13dB |
Input Impedance | 14k Ohms |
Output Impedance | 10 Ohms |
S+N/N Ratio | Wide Band >96dB |
DIN >108dB | |
IEC “A” >112dB | |
Absolute Phase | Phono Zero Degrees |
XLR Zero Degrees, Pin 2 Hot | |
Output XLR CMRR (100Hz – 10kHz) | >60dB |
DIGITAL INPUTS Optical and Coaxial | |
Distortion | <0.001% at all supported sample rates |
44.1kHz, 48.0kHz, 88.2kHz, 96.0kHz, 192.0kHz* * 192kHz supported via coaxial input only | |
DIGITAL INPUTS USB | |
Distortion | <0.001% at all supported sample rates |
44.1kHz, 48.0kHz, 88.2kHz, 96.0kHz, 176.4kHz, 192.0kHz, 352.8kHz, 384kHz | |
SUPPORTED WORDLENGTHS | |
Optical and Coaxial | 16bit and 24bit |
USB | 16bit, 24bit and 32bit |
DSD | |
Frequency Response -1dB | -1dB: < 10Hz – 50kHz |
Supported DSD Rates | Windows DSD64, DSD128 and DSD256 |
MacOS DSD64 and DSD128 | |
PHYSICAL | |
Dimensions (HxWxD) | 90 x 445 x 330mm (3.5˝ x 17.5˝ x 13˝) |
Weight | 7kg / 15.4Ilbs |