390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: Parasound P 6
Ausstattung & technische Daten
| Specification | |
| Frequency Response | 10 Hz - 100 kHz, +0/-3 dB |
| 20 Hz - 20 kHz, +0/-0.5 dB | |
| Total Harmonic Distortion (THD) | < 0.01 % |
| Interchannel Crosstalk | > 70 dB at 20 kHz |
| > 78 dB at 1 kHz | |
| Preamplifier Stage Input Sensitivity | 300 mV in for 1 V |
| Total Gain: 10 dB | |
| Max Output: 7.5V | |
| S/N Ratio - Line Inputs 1- 5 | > 108 dB (shorted, IHF A-weighted) |
| > 88 dB (shorted, unweighted) | |
| S/N Ratio - DAC Inputs | > 108 dB (IHF A-weighted) |
| > 88 dB (unweighted) | |
| S/N Ratio - Phono Input | MM > 80 dB (shorted, IHF A-weighted) |
| MM > 70 dB (shorted, unweighted) | |
| MC > 67 dB (shorted, IHF A-weighted) | |
| MC > 55 dB (shorted, unweighted) | |
| Phono Stage Sensitivity / Input Impedance | MM: 38 dB / 47 k Ω |
| MC: 52 dB / 47 k Ω or 100 Ω | |
| Input Impedance | Unbalanced: 24 k Ω |
| Balanced: 100 k Ω per leg | |
| Preamplifier Output Impedance | Unbalanced: 100 Ω |
| Balanced: 470 Ω per leg | |
| High & Low Pass Crossover Slope | 12 dB per octave |
| Supported DAC Sampling Rates | USB: up to 384 kHz / 32-bit PCM |
| DSD Native: DSD 64, DSD 128, DSD 256 | |
| DSD over PCM (DoP) at 384 kHz | |
| Coax/Optical: up to 192 kHz / 24-bit PCM | |
| Digital to Analog Converter | ESS Sabre32 Reference ES9018K2M |
| 384 kHz / 32-bit | |
| USB 2.0 Controller | Savitech SA9227, 384 kHz / 32-bit |
| Headphone Amplifier | Texas Instruments TPA6120A |
| Output Impedance 10 ohms | |
| XLR Pin Identification | 1 = Ground (Shield) |
| 2 = Positive | |
| 3 = Negative (Return) | |
| Power Requirement | Standby: 0.5 watts |
| Power On: 15 watts | |
| 100-250 VAC 50/60 Hz (automatic)10 Hz - 100 kHz, +0/-3 dB | |
| 20 Hz - 20 kHz, +0/-0.5 dB | |
| Dimensions | Width: 17-1/4" (437 mm) |
| Depth: 15" (381 mm) | |
| Depth, with cables 17" (432 mm) | |
| Height, with feet: 4-1/8" (105 mm) | |
| Height, without feet: 3-1/2" (89 mm), 2U | |
| Net Weight | 14 lb. (6.3 kg) |
