390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Parasound A 23+
Ausstattung & technische Daten
| Specification | |
| Power Output – Stereo Mode (0.06% THD) | 160 watts x 2, 8 Ω both channels driven |
| 240 watts x 2, 4 Ω both channels driven | |
| Power Output – Stereo Mode (0.9% THD) | 210 watts x 2, 8 Ω both channels driven |
| 300 watts x 2, 4 Ω both channels driven | |
| Power Output – Bridged Mode (0.06% THD) | 500 watts x 1, 8 Ω |
| Bridged 4 Ω operation is not recommended | |
| Power Output – Bridged Mode (0.9% THD) | 600 watts x 1, 8 Ω |
| Bridged 4 Ω operation is not recommended | |
| All Power measurement are at 120 VAC, RMS continuous power, full audio band (20 Hz - 20 kHz) | |
| Current Capacity | 45 amps peak, per channel |
| Slew Rate | > 130 volts per microsecond |
| Frequency Response | 5 Hz - 100 kHz, +0/-3 dB |
| 20 Hz - 20 kHz, +0/-0.25 dB | |
| Total Harmonic Distortion (THD) | < 0.06 % at full power |
| < 0.03 % at typical listening levels | |
| IM Distortion | < 0.04 % |
| TIM | Unmeasurable |
| Interchannel Crosstalk | > 85 dB at 1 kHz |
| > 70 dB at 20 kHz | |
| Input Impedance | Unbalanced: 33 kΩ |
| Balanced: 66 kΩ,(33 kΩ per leg) | |
| Total Gain | 29 dB |
| Input Sensitivity for 28.28 V Output into 8 Ω | Unbalanced: 1 V |
| Balanced: 1 V per leg | |
| S/N Ratio | > 112 dB, input shorted, IHF A-weighted |
| > 107 dB, input shorted, unweighted | |
| Damping Factor | > 800 at 20 Hz |
| DC Trigger Requirements | +9 Vdc to +12 Vdc, 5 mA |
| Audio Trigger Requirement | 2 mV - 10 mV |
| XLR Pin Identification | 1 = Ground (Shield) |
| 2 = Positive | |
| 3 = Negative (Return) | |
| Power Requirement | Standby: <1 Watt |
| Idle (no music playing): 75 Watts | |
| Typical Listening levels: 125 Watts | |
| Maximum: 800 Watts | |
| 110-125 VAC 60 Hz or 220-250 VAC 50 Hz | |
| AC mains voltage is set on rear panel | |
| Dimensions | Width: 17-1/4" (437 mm) |
| Depth: 15"-1/4" (388 mm) | |
| Depth, with cables 17" (432 mm) | |
| Height, with feet: 4-1/8" (105 mm) | |
| Height, without feet: 3-1/2" (89 mm), 2U | |
| Net Weight | 27 lb. (12.2 kg) |
