Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Hifi sonstiges
Ausstattungsliste: ATOHM S500
Specification | |
Type | Subwoofer amplifiers |
Amplifier module power | 500 Wrms/4ohms/80s/direct mode |
Impedance | load 4-16 ohms (3ohms mini) |
Damping factor | above 1000 |
Harmonic distorsion | below 0.1% |
High pass crossover | None / X-Gard technology |
Low pass crossover | adjustable from 38 Hz (-6dB) to 200 Hz (-6dB) |
Filtering slope | adjustable 12dB-24dB-LFE |
Phase control | 0-180° |
Low level input | 2x cinchs |
High level input | 2x 4mm banana plugs |
Output | 4.8mm terminals on the rear cup |
Short circuit | Protected |
Overheat protect | Yes |
DC protect | Yes |
Supply voltage | 115 V / 230 V (internal jump) 50 Hz |
Power consumption | 700 Wmax |
Dimensions | 220*190*55 (mm) |
Weight | 1.2 kg |