490_0_3
Anzeige
Topthema: Kinofeeling für Zuhause
Genießen Sie höchsten Komfort mit Kinosofas von Sofanella
Die hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigen
488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Kopfhörerverstärker
Ausstattungsliste: Exposure XM HP
Ausstattung & technische Daten
| Features | |
| Custom-made toroidal power transformer | |
| High quality all aluminium casework and extruded front panel | |
| High quality resistors & capacitors used in the signal path | |
| All discrete audio output stage with high drive capability for low impedance headphones | |
| 2 pairs of 6.35mm jacks and 2 pairs of XLR sockets allowing 2 pairs of headphones to be used at one time | |
| Moving magnet phono and two line level inputs | |
| Two coax (bnc) and two optical inputs and one class 2 USB input with DSD | |
| Separate pre-amp output | |
| Remote control | |
| Three year guarantee | |
| Available in black or titanium | |
| Analogue Inputs | |
| Pre Amplifier Output (input sensitivity / impedance / S/N) | AUX/PH input MM : 2.5mV @ 1KHz, 47K ohms S/N > 73dB |
| Frequency Response | +/-0.5dB 50Hz-20KHz. High pass roll off -1.5dB @ 20Hz |
| AUX 2 & AUX 3 input line | 350mV @ 1KHz > 14K ohms output gain x3.75, +11.5dB |
| Total Harmonic Distortion | <0.005% at 1KHz : @ 1.3V RMS output |
| Frequency Response | 20Hz - 20KHz +/- 0.5dB |
| Signal to Noise Ratio ref 1.3V RMS Output | 1KHz >92dB |
| Channel Separation @ 20KHz | >60dB |
| Digital Inputs | |
| SPDIF inputs BNC Coax & Optical | 32 - 192KHz @ 16-24 bits |
| Total Harmonic Distortion | <0.005% at 1KHz @ 1.3V RMS output |
| Signal to Noise Ratio ref 1.3V RMS Output | 1KHz : >98dB |
| USB input | Linear PCM 44K1 - 192KHz @ 16-24 bits DSD x64 (DoP) Asynchronous transfer from host |
| Headphone Output | |
| Output Impedance | < 5 ohms |
| Maximum Level into 33 ohms load : @ 1KHz & 0.01% THD | 7V RMS (1.5W) |
| Total Harmonic Distortion : @ 2V output, 1KHz | <0.003% (120mW) |
| Maximum Level into 330 ohms : @ 1KHz & 0.01% THD | Maximum Level into 330 ohms : @ 1KHz & 0.01% THD : 7.5V RMS (170mW) |
| Total Harmonic Distortion | @ 2V output, 1KHz : <0.003% (12mW) |
| Load Impedance total all outputs | 16 ohms minimum |
| General Specifications | |
| Mains Supply | 110/120V or 220/240V @ 50/60Hz (factory set) |
| Power Consumption | <15W |
| Dimensions (WxHxD) | 218mm x 89mm x 363mm (inc knob) |
| Net Weight (unpacked) | 4kg |
