390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
491_17256_1
Anzeige
Topthema: Die Rückkehr einer Ikone
Revox B77 MK III
Revox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_ICE8T
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 8 inch (203 mm) treated paper w/ring mode decoupled cloth surround & steel basket |
| Tweeter | 0.98 inch (25 mm) treated cloth dome, horn loaded |
| Crossover Frequency | 2,5 kHz |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 7.5W/15W/30W/60W at 70V; 15W/30W/60W at 100V |
| Frequency Response | 70 Hz to 20 kHz (±3 dB) |
| Frequency Range | 55 Hz to 20 kHz (-10 dB) |
| Power Handling | 75 Watts program (8 Ohms) |
| Sensitivity | 89 dB @ 1W/1m |
| Coverage | 95° conical (nominal) |
| Connections | |
| Input | (1) 4-pin 5mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, 1/2" or 3/4" conduit knockout top and side, (1) cable clamp included |
| Baffle | ABS UL94V-0 plastic |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps; 2.4 in (61 mm) maximum surface thickness; 8.9 in (226 mm) minimum mounting depth; 11.2 in (285 mm) diameter recommended cutout; Tile bridge included; |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 12.07 in (307 mm) not including toggles |
| Depth | 9.10 in (231 mm) |
| Weight | 12.2 lb (5.7 kg) |
