488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
491_17256_1
Anzeige
Topthema: Die Rückkehr einer Ikone
Revox B77 MK III
Revox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 403DCe
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3 dB) (1) BM Backcan | 110 Hz - 50 kHz |
| Frequency Range (-10 dB) (1) BM Backcan | 80 Hz - 54 kHz |
| System Sensitivity (1W @ 1m) (2) | 88 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Power Handling (3) | Average: 60 W |
| Programme: 120 W | |
| Peak: 240 W | |
| Recommended Amplifier Power | 120 W @ 16 ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated Maximum SPL | Average: 107 dB |
| Peak: 113 dB | |
| Transformer Taps (via front rotary switch) | 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation |
| 100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation | |
| TRANSDUCERS | |
| Dual Concentric point source driver | 1 x 100 mm (4.0”) Dual Concentric driver, using Omnimagnet technology |
| Low Frequency | 35 mm (1.38”) voice coil, treated multi fiber paper pulp cone |
| High Frequency | 20 mm (0.79”) PEI dome |
| PHYSICAL | |
| Enclosure | Backcan: Reflex loaded UL 94V-0 rated ABS |
| Baffle: Reflex loaded UL 94V-0 rated ABS | |
| Grille: Steel, with weather resistant coating | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed backcan |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Dimensions | |
| Bezel Diameter | 205.0 mm (8.07”) |
| Front of ceiling to rear of pod | 147.6 mm (5.81”) |
| Hole cutout diameter | 187 mm (7.36”) |
| Net Weight (ea) | 2.75 kg (6.06 lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Packed Quantity | 2 |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
