Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenTCL ist ein weltweit führender Hersteller von Mini-LED-TVs. Die eigenen Produktionsstätten gehören zu den modernsten Fernseher-Fabriken der Welt. Wir testen das Premiummodell C855 in 75 Zoll.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Von Schweikert VR-11SE Mk2
Specifications | |
System Type | Dynamic-driver six-way system using acoustic suspension and three-piece stacking enclosure system; adaptive room correction unit supplied for accurate sound in any environment. |
Woofer Tuning | Acoustic suspension design yielding the tightest mid-bass and sub-bass reproduction possible, without the added problem of “one note bass”, often associated with vented designs. |
Large subwoofer cabinet design enables accurate sub-bass reproduction down to 10Hz. The dual 15″ subwoofers, located on the rear of each cabinet, are driven by an onboard 1,000 watt amplifier. | |
These amplifiers employ adjustments to compensate for varying room conditions. See owners manual for details. | |
Cabinet and Bracing | A two-inch thick front baffle, sidewalls, and rear baffle provides exceptional vibration control and image solidity, while one-inch HDF interlocking braces provide exceptional rigidity and freedom from boxy colorations. |
The internal damping consists of thick acoustic felt lining, foam and Dacron stuffing to eliminate cavity resonances. Large casters are provided for ease of movement. | |
Size (per channel) | Height: 90″, Width Front: 11″, Width Rear: 21″, Depth: 30″. |
Weight (per channel) | Woofer module (x2): 268 lbs each, M/T module: 157 lbs., Total Weight Per Channel: 693 lbs. |
Driver Complement (per channel) | 15″ Kevlar-Nomex honeycomb woofers (x2), 8.5″ magnesium mid-basses (x4), 7″ carbon Kevlar-cellulose Aerogel midrange drivers (x2), 1.5″ dual-concentric silk ring tweeters (x2), |
5″ aluminum ribbon supertweeters (X2). All drivers use a proprietary Advanced Motor System with low distortion design. | |
Crossover | Proprietary film and foil capacitors, air-core inductors, military-spec film-foil resistors. Crossover points and architecture are classified. |
Binding Posts | Three sets of five-way terminal posts enabling tri-wiring. Single wire can be used direct to M/T with jumpers to the woofer cabinets. |
Ambience Driver | Rear-firing 5″ aluminum ribbon. Ambience circuit uses Dimensional Control (effects level) to compensate for room acoustics and soundstage depth. |
Provides a Global Axis polar response pattern to simulate live musical reproduction. | |
Fine Tuning Adjustments | Subwoofer level control and frequency tuning variable from 50Hz to 100Hz (set flat at 75Hz, volume at 10 o’clock). |
Front tweeter level control adjustment centered at 4kHz with 3dB gain and 18dB cut. Front supertweeter level control adjustment centered at 20kHz with 16dB gain and 5dB cut. | |
Subwoofer Amplifier Power | 1000 watts rms Class D technology. (one amplifier powers each subwoofer). System total is 4000 watts rms, 8,000 watts peak. |
Frequency Response | 10-100 kHz, +/- 6 dB (16-50 kHz +/- 3 dB) |
Impedance | 8 ohms avg. (5 ohm dips between 200Hz-300 Hz and 6kHz-12kHz). |
Recommended Power | 20 watts up to 1000 watts (music power). |
Sensitivity | 96 dB @ 1w/1m using 2.83 v. (99 dB with subwoofer and supertweeter boost settings). |
Finishes | Hi-Gloss Piano Black. Premium finishes available, please call for quotation. |