Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
115_17450_2
Topthema: Pure Eleganz
71_16205_2
Topthema: Raumakustik verbessern - Schallabsorber einsetzen

Kategorie: Lautsprecher Inwall


Ausstattungsliste: Tannoy CMS 503ICT


Ausstattung & technische Daten
Specification
SYSTEM
Frequency Response (-3 dB) (1) BM Backcan 85 Hz - 22 kHz
Frequency Range (-10 dB) (1) BM backcan model 74 Hz - 24 kHz
Frequency Range (-10dB) (1) PI fitted with backcan 71 Hz - 24 kHz
System Sensitivity (1W @ 1m) (2) 89 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1 kHz to 6 kHz) 105 degrees
Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz
Directivity Index (DI) 7.0 averaged 1 kHz to 6 kHz
Power Handling (3) Average: 50 W
Programme: 100 W
Peak: 200 W
Recommended Amplifier Power 100 W @ 16 ohms
Nominal Impedance (Lo, Z) 16 Ohms
Rated Maximum SPL Average: 106 dB
Peak: 112 dB
Transformer Taps (via front rotary switch) 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation
100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation
Crossover 7 kHz inductively coupled
TRANSDUCERS
Low Frequency 130 mm (5.00”) mineral loaded polypropylene
High Frequency ICT aluminium dome
PHYSICAL
Enclosure Backcan: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Blind Mount (BM) Complete with fixed backcan
Pre Install (PI) Separate backcan for pre-installation
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm
Conduit Knockouts on PI Backcan 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
Connectors Removable locking connector with screw terminals with “loop through” facility
Compliance UL-1480, UL-2043, CE
Dimensions
Bezel Diameter 205.9 mm (8.11")
BM Model: Front of ceiling to rear of backcan 188.5 mm (7.42")
BM Model: Front of ceiling to top of safety loop 205.8 mm (8.10")
PI Model: Front of ceiling surface to rear of speaker unit 131.8 mm (5.19")
PI Model: Front of accessory backcan bezel to top of safety loop 153.5 mm (6.04")
Hole cutout diameter (all models) 190 mm (7.48”)
Net Weight (ea) CMS 503ICT BM 3.85 kg (8.49 lbs)
CMS 503ICT PI 2.85 kg (6.28 lbs)
PI Backcan 2.6 kg (5.73 lbs)
Included Accessories C Ring Tile bridge Paint mask Cutout template Grille
Optional Accessories Plaster (Mud) ring
Arco Grille
Packed Quantity 2