Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
Topthema: Pure Eleganz
Topthema: Raumakustik verbessern - Schallabsorber einsetzen

Kategorie: Lautsprecher Inwall

Ausstattungsliste: Tannoy CMS 601

Ausstattung & technische Daten
Frequency Response (-3dB) (1) BM Back can 78Hz - 22kHz
Frequency Range (-10dB) (1) BM Back can 51Hz - 24kHz
Frequency Range (-10dB) (1) PI Back can 46Hz - 24kHz
System Sensitivity (1W @1m) (2) 91dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 92 degrees
Directivity Factor (Q) 7.1 averaged 1kHz to 6kHz
Directivity Index (DI) 7.9 averaged 1kHz to 6kHz
Rated Maximum SPL Average: 108dB Peak: 112dB
Power Handling (3) Average: 60W Programme: 120W Peak: 240W
Recommended Amplifier Power 120W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch) 70V: 60W / 30W / 15W / 7.5W/OFF & low impedance operation 100V: 60W / 30W / 15W / OFF & low impedance operation
Crossover 7kHz inductively coupled
Low Frequency 1 x 165mm (6.50") mineral loaded polypropylene ICT™
High Frequency 1 x ICT™ aluminium dome
Enclosure Back Can: Zinc plated steel Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Min / Max Clamping Range: 8.0mm (0.32") / 29.0mm (1.14") Recommended Clamp Torque: 1.5Nm
Back Can Options Blind Mount (BM): Complete with fixed back can Pre Install (PI): Separate back can for pre installation
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions: 19 / 22 / 28mm (0.75” / 0.87” / 1.10”)
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings UL-1480, UL-2043, CE
BM Hole Cutout Diameter 253mm (9.96")
PI Hole Cutout Diameter 253mm (9.96")
Dimensions Bezel diameter: 280mm (11.02") BM model: Front of ceiling to rear of back can 258mm (10.16") BM model: Front of ceiling to top of safety loop 275.30mm (10.84")
PI model: Front of ceiling surface to rear of speaker unit 95.50mm (3.76") PI model: Front of accessory back can bezel to top of safety loop 168.50mm (6.60")
Net Weight (ea) CMS601 BM: 6.50kg (14.33lbs) CMS601 PI: 4.00kg (8.82lbs) PI back can: 3.685kg (8.06lbs)
Included Accessories C Ring Tile bridge Paint mask Cutout template Grille
Optional Accessories Plaster (mud) ring