379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 803DC
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3 dB) (1) BM Backcan | 47 Hz - 30 kHz |
| Frequency Range (-10 dB) (1) BM backcan model | 40 Hz - 35 kHz |
| Frequency Range (-10dB) (1) PI fitted with backcan | 41 Hz - 35 kHz |
| System Sensitivity (1W @ 1m) (2) | 92 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Power Handling (3) | Average: 90 W |
| Programme: 180 W | |
| Peak: 360 W | |
| Recommended Amplifier Power | 180 W @ 16 Ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated Maximum SPL | Average: 112 dB |
| Peak: 118 dB | |
| With THP60 - Average: 110 dB | |
| Transformer Taps (via front rotary switch) | 70 V: 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation |
| 100 V: 60 W (165 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation | |
| TRANSDUCERS | |
| Dual Concentric point source driver | 1 x 200 mm (8.0”) Dual Concentric driver, using Omnimagnet technology |
| Low Frequency | 44 mm (1.75”) voice coil, treated multi fiber paper pulp cone |
| High Frequency | 25 mm (1.00”) PEI dome |
| PHYSICAL | |
| Enclosure | Backcan: Zinc plated steel |
| Baffle: Reflex loaded UL 94V-0 rated ABS | |
| Grille: Steel, with weather resistant coating | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed backcan |
| Pre Install (PI) | Separate backcan for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Dimensions | |
| Bezel Diameter | 319.0 mm (12.56”) |
| BM Model: Front of ceiling to rear of backcan | 310.5 mm (12.22”) |
| BM Model: Front of ceiling to top of safety loop | 327.7 mm (12.90”) |
| PI Model: Front of ceiling surface to rear of speaker unit | 125.6 mm (4.94”) |
| PI Model: Front of accessory backcan bezel to top of safety loop | 168.5 mm (6.63”) |
| Hole cutout diameter (all models) | 295 mm (11.61”) |
| Net Weight (ea) | CMS 803DC BM: 8.5 kg (18.74 lbs) |
| CMS 803DC PI: 4.9 kg (10.80 lbs) | |
| CMS 803 PI Backcan: 4.0 kg (8.81 lbs) | |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Arco Grille | |
| Packed Quantity | 2 |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
