Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Aerial Acoustics 20T V2
Specification | |
Frequency Response | 25Hz to 35kHz ±2dB. -8dB at 22Hz and 40kHz |
Sensitivity | 90dB at 2.83 Vrms and 1.0 meter on axis |
Impedance | 4Ω nominal, 2.8Ω minimum, low reactance |
Power Requirement | 50 to 800 watts (8Ω rating) recommended |
Woofers | Two 8.9″ (225mm) cast magnesium alloy frame drivers, Rohacell® core cones with carbon & glass fiber surfaces, Massive vented magnet structures, 2.0″, (51mm) diameter ultra-linear long-stroke coils |
Midrange | 7.1″ (180mm) cast magnesium alloy frame driver, Carbon filament reinforced damped composite cone, Large magnet structure with vented machined pole piece, 1.6″ (40mm) diameter linear stroke coil |
Tweeter | 4.1″ (105mm) 5 micron pure aluminum ribbon, Precision cast aluminum waveguide, Massive ultra-high Gauss neodymium magnet structure, High-power, self-aligning diaphragm, Acoustically damped tapered rear chamber |
Crossovers | 300Hz and 3.5kHz at 24 B per octave Linkwitz-Riley, Large independent networks on glass-epoxy PCBs, High-purity copper wiring with Teflon™ insulation, Ultra-premium passive components. Silver solder |
Cabinet | Compound constrained layer damped 2″ thick walls, Isolated, individually-optimized bass and head enclosures, Extensive interlocked bracing. Tongue and groove joints, |
Mirror-imaged matched pairs in fine architectural veneers Limited edition exotic veneers and high gloss finishes | |
Connections | Four gold-plated WBT binding posts with copper jumpers, Bi-wire and bi-amp capable. Head unit cable included |
Included Bases | Laser-cut solid steel bases including stainless steel spikes, machined hardware, and floor protectors, Gold, silver, or black finishes |
Dimensions HWD | Head cabinet: 15.4 × 10.7 × 22.5″ (390 × 272 × 572mm) |
Bass Cabinet: 29.1 x 12.6 x 22.5″ (740 × 320 × 572mm) | |
Assembled: 47.0 × 12.6 × 22.5″ (1194 × 320 × 572mm) | |
Weight each | 252lbs (115kg) |