Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKenwoods brandneue Multimedia-Headunit bringt nicht nur einen riesigen 10,1-Zoll-Bildschirm mit, sondern auch eine speziell auf Wohnmobile zugeschnittene Navigation.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Audioengine HD3
Technical specification | |
Type | 2.0 powered multimedia speaker system |
Amplifier type | Dual analog class A/B monolithic |
Power output | 60W peak power total (15W RMS / 30W peak per channel), AES |
Drivers | 2.75″ aramid fiber woofers, 3/4″ silk dome tweeters |
Inputs | 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth |
Outputs | RCA variable line-out, 3.5mm mini-jack headphone out |
Mains voltages | 110-240V 50/60Hz auto-switching |
SNR | >95dB (typical A-weighted) |
THD+N | <0.05% at all power settings |
Crosstalk | <50dB |
Frequency response | 65Hz-22kHz +/-2.0dB |
Freq. response w/bass reduction switch selected | 100Hz-22kHz +/-2.0dB (-5dB down) |
Input impedance | 5K ohms unbalanced |
Protection | Output current limiting, thermal over-temperature, power on/off transient protection |
Headphone amp specifications | |
Headphone amp type | OPA2134 |
Full-scale headphone output level | 2.0V RMS |
Output impedance | 2 ohms |
Recommended headphone impedance range | 10 ohms to 10K ohms |
Bluetooth specifications | |
Internal D/A converter | PCM 5102 |
Input bit depth | 24-bits, upsampled |
Bluetooth receiver type | Bluetooth 5.0 audio |
Supported codecs | aptX HD, aptX low latency, aptX, AAC, SBC |
Wireless operation range | Up to 100ft (30m) typical |
Input data rate | Determined by Bluetooth |
Wireless latency | ~30 milliseconds (ms) |
USB specifications | |
Connector type | Micro-USB |
USB device class | USB 1.1 or above |
Internal D/A converter | PCM 5102 |
Input bit depth | 24-bits, upsampled |
Input data rate | 44.1KHz/48KHz |
Weights and measures | |
Dimensions (each) | 7″(H) x 4.25″ (W) x 5.5″ (D) |
Weight (LEFT speaker) | 1.8Kg/4lbs |
Weight (RIGHT speaker) | 1.5Kg/3.4lbs |
Materials and construction | |
Materials and construction | 18mm thick MDF cabinets with real wood veneer |
3/4″ (20mm) silk dome tweeters with neodymium magnets | |
2.75″ aramid fiber woofers with advanced voice coils | |
Finish options | |
Finish options | Satin Black |
High-Gloss White | |
Walnut | |
Cherry |