504_0_3
Anzeige
Topthema: 0-%-Finanzierung bei Nubert
Bis zum 6. Januar 2025 Lautsprecher zinslos finanzieren
Fast so traditionell wie der Adventskranz in der Vorweihnachtszeit ist die Null-Prozent-Finanzierungsaktion im Dezember bei www.nubert.de, mit der sich lang gehegte Wünsche unkompliziert erfüllen lassen. Die Aktion läuft bis zum 6. Januar.
>> www.nubert.de/sale/>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: CODA Audio LINUS14D
Ausstattung & technische Daten
| Specification | |
| Type | 4 Channel DSP Amplifier with Loudspeaker Management |
| General | |
| Number of output channels | 4 |
| Output stage | Class D |
| Internal samplerate / bit-depth | 96 kHz / 24 bit |
| Output-to-noise ratio (22 Hz – 20 kHz, 4 Ω – analogue input) | >108 dB (unweighted) |
| >111 dB (A-weighted) | |
| Signal-to-noice ratio (22 Hz – 20 kHz, 4 Ω – digital input) | >116 dB (unweighted) |
| >119 dB (A-weighted) | |
| Frequency response (8 Ω load with CLEAR preset) | 20 Hz – 20 kHz = (+0.0 dB /-1.0 dB) |
| THD+N & IMD (4 Ω load @ 1/2 output power) | 20 Hz – 20 kHz = < 0.005% |
| Latency (input to loudspeaker output) | Minimum 2.70 ms AES/EBU input |
| Minimum 2.00 ms analogue input | |
| Protection circuits | Inrush current limiter Thermal limiter Output DC SMPS over-current Output overload |
| LED indicators | Mute status Limit Signal Sensor Protection Ethernet control active Digital signal locked Dante™ Power on |
| Ethernet connection | 2 x 100 Mbps RJ45 Control |
| 1 x 100 Mbps RJ45 DANTE™ | |
| AC Mains | |
| AC mains input connector | Neutrik 32A powerCON® |
| AC mains voltage (high range) (dual voltage SMPS with automatic voltage range selection) | 180 V = Minimum |
| 230 V = Nominal | |
| 265 V = Maximum | |
| AC mains voltage (low range) (dual voltage SMPS with automatic voltage range selection) | 90 V = Minimum |
| 115 V = Nominal | |
| 132 V = Maximum | |
| AC mains frequency | 47 – 63 Hz |
| Power consumption (1/4 power = 600 W @ 4 Ω to represent typical music signal) | Amplifier in standby = 17.6 W |
| Amplifier idle = 191 W | |
| Amplifier ¼ power = 3200 W | |
| Input | |
| Input sources | Analogue & AES/EBU & Dante™ |
| Analogue input impedance (balanced) | 12 kΩ |
| Maximum input level (analogue differential) | +18 dBu / 6.15 Vrms |
| Input connections | 4x XLR3 Analogue IN |
| 2x XLR5 Sensor IN | |
| 1X RJ45 LINET IN (8x CH) | |
| 1x RJ45 LINET LINK (8x CH) | |
| 1x RJ45 DANTE IN (4x CH) | |
| Supported digital input formats (internal SRC) | 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz |
| Output | |
| RMS output power (20 Hz – 20 kHz, THD <0.01%) (all channels driven) | 1800 W @ 8 Ω |
| 3500 W @ 4 Ω | |
| 4400 W @ 2.7 Ω | |
| 4500 W @ 2 Ω | |
| Peak output power (20 Hz – 20 kHz, 6 dB Crest Factor) (all channels driven) | 3600 W pk @ 8 Ω |
| 7000 W pk @ 4 Ω | |
| 6500 W pk @ 2.7 Ω | |
| 5200 W pk @ 2 Ω | |
| Maximum output voltage | +/- 170 V pk |
| Maximum output current | +/- 52 A pk |
| Damping Factor (8 Ω load, 1 kHz & below) | 2500 |
| Minimum output load | 2 Ω nom |
| 2.7 Ω for sensor control | |
| Power output connections | 2x Neutrik NL4 speakON® |
| 1x Neutrik NL8 speakON® | |
| Thermal | |
| Operating temperature | +5°C to +55°C |
| 41°F to 131°F | |
| Thermal output (BTU/h) | 679.02 = Idle |
| 2470.39 = 20 % | |
| 5159.16 = 50 % | |
| 9635.88 = 100 % | |
| Thermal output (kWh) | 0.199 = Idle |
| 0.724 = 20 % | |
| 1.512 = 50 % | |
| 2.824 = 100 % | |
| Cooling | 2x thermally controlled fans |
| Hot air expelled at rear | |
| Physical | |
| Dimensions (WxHxD) | 483.5 x 88 x 454.18 mm / 19.04” x 3.46” x 17.88” (2 Rack units) |
| Net Weight | 14.75 kg / 32.5 lbs |
