462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Focusrite RedNet R1
Ausstattung & technische Daten
| Specification | |
| Type | Desktop Remote Controller |
| Internal Talkback | |
| Note | All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω |
| Gain Range | 0dB to 55dB |
| Type | Electronically Balanced, Zin = 3kΩ |
| Max. Input Level | +10dBu ± 0.5dB |
| External Talkback | |
| Note | All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω |
| Gain Range | 0dB to 55dB |
| Max. Input Level | +10dBu ± 0.5dB |
| Frequency Response | 20Hz - 20kHz ± 2dB |
| THD + N | Less than -98dB (0.0012%) @ -1dBFS |
| EIN | Less than -128dBu |
| Signal-to-Noise Ratio | -111dB |
| Common-Mode Rejection Ratio | 50/60Hz CMRR: <-77dB |
| Type | Electronically Balanced, Zin = 3kΩ |
| Maximaler Eingangspegel | +26 dBU ±0.5 dB |
| Gain-Bereich | 57dB |
| Headphone Output | |
| Note | All measurements taken at +19dBm reference level, maximum gain, RL = 600Ω |
| 0 dBFS Reference Levels | +11dBm |
| Frequency Response | 20Hz to 20kHz ±0.5dB |
| THD + N | -100dB (0.001%) @ -1dBFS, Rs = 150R |
| Dynamic Range | 108dB A-weighted (typical), 20Hz - 20kHz |
| Noise in Presence of Signal (NiPoS) | Greater than -97 dBu |
| Output Impedance | 5Ω |
| Headphone Impedance | 32Ω - 600Ω |
| Microphone/ Line Crosstalk | |
| Mic Input to Headphone Output | Less than -122dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Headphone Output to Mic Input | Less than -84dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Headphone Crosstalk | |
| Left to Right | Less than -85dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Right to Left | Less than -85dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Digital Performance | |
| Supported Sample Rates | 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit |
| Clock Sources | Internal or from Dante Network Master |
| Rear Panel Connectivity, Pots & Switches | |
| External Talkback Mic Input | 1 x XLR (F) |
| Foot Switch | 1 x 1/4" stereo jack |
| Outputs | |
| Headphone Outputs | 1 x 1/4" stereo jack |
| Pots & Switches | |
| Power Switch | 1 x Switch |
| Gain Pot | 1x Pot |
| Talkback Switch | 1 x Tri-State Switch (External Talkback + 48V, External Talkback and Internal Talkback) |
| PSU & Network Connections | |
| PSU (PoE and DC) | 1 x PoE Input and 1 x DC 12V Locking Barrel Input Connector |
| Network | 1 x Standard RJ45 connector |
| Top Panel Indicators | |
| LCD Screens | 2 x Screens (Control, Status, Metering & Menus) |
| Control Functions | 2 x Continuous Pot (Level & Dim). 1 x Pot (Headphone Output). 24 x Multi-Function Switches (Sources, Talkback, Monitor Outputs & Menu Items). 12 x Single-Function Switches (Headphones, Sum, Spill, Mode, Mute, Solo, Outputs, A/B, Cut x 2, Dim & Output Lock) |
| Power | |
| Power over Ethernet (PoE) | Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible) |
| DC Power Supply | 1 x 12V 1.2A DC Power Supply |
| Power Consumption | PoE: 10.3W - DC: 9W (When using supplied DC PSU) |
| Heat Performance | |
| Operating Temperature | Operates at up to an ambient temperature of 40 degrees Celsius |
