Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Fostex UR-2
Specifications | |
Type | CF Field Recorder |
RECORDING / PLAYBACK GENERAL | |
Recording Medium Compact Flash Card | |
USB port for USB storage device (USB 2.0, Hi-speed) | |
Sampling frequency: 44.1/48/88.2/96kHz (24bit), 44.1/48kHz (16bit) | |
Record format: BWF (WAV), MP3 *with future software update | |
ADC/DAC: 24bit Delta-Sigma modulation | |
Recording time: Approx. 94minutes (1GB SD card/16bit/44.1kHz/stereo) | |
Recording track: Stereo or Mono | |
Frequency response: 20Hz~20kHz ±2dB (44.1/48kHz) 20Hz~40kHz ±3dB (88.2/96kHz) | |
S/N (between ADC and DAC, 24bit, 48kHz) | |
Line 103dB or more (typical) | |
Mic (with Max gain) 85dB or more (typical) | |
Dynamic range: 103dB or more (typical) | |
T.H.D: Line 0.006% or less (1kHz, -1dBFS) | |
Mic (with Max gain) 0.01% or less (1kHz, -1dBFS) | |
Reference level: -12dBFS/-20dBFS (switchable) | |
Input and Output | |
0dBu = 0.775Vrms, 0dBV = 1.0Vrms | |
Analog input (INPUT L, R) | |
Connectors: XLR 3-31, balanced (pin #2 hot), RCA pin jack, un-balanced | |
Nominal input level: +4dBu (XLR/ balanced), -10dBV (RCA/ un-balanced) | |
Maximum input level: +24dBu (-20dBFS, XLR/ balanced), +10dBV (-20dBFS, RCA/ un-balanced) | |
Input impedance: more than 10kW | |
Microphone input (MIC IN) | |
Connector: XLR3-31, balanced (pin #2 hot)) | |
Nominal input level: -56 ~ -12dBu | |
Maximum input level: +7dBu (with Max gain) | |
Input impedance: more than 1.5kW | |
Phantom Power: P48V | |
Analog output (OUTPUT L, R) | |
Connectors: XLR 3-32, balanced (pin #2 hot), RCA pin jack, un-balanced | |
Nominal output level: +4dBu (XLR/ balanced), -10dBV (RCA/ un-balanced) | |
Maximum output level: +24dBu (-20dBFS, XLR/ balanced), +10dBV (-20dBFS, RCA/ un-balanced) | |
Load impedance: more than 10kW | |
Digital input | |
Connector: XLR 3-31 (pin #2 hot) | |
Format: IEC60958 (AES/EBU) or IEC60958 (S/P DIF) *Auto select | |
Digital output | |
Connector: XLR 3-32 (pin #2 hot) | |
Format:IEC60958 (AES/EBU) or IEC60958 (S/P DIF) | |
Headphones output | |
Connector: f6.3mm stereo phone jack | |
Maximum output: 100mW (with 32W load) | |
Remote | |
Connector: D-sub 9pin (RS-232C), D-sub 25pin (Parallel) | |
Foot SW | |
Connector:f6.3mm phone jack | |
USB port | |
Connectors: A type (Host, Keyboard), B type (for PC, USB 2.0 Hi-speed) | |
SD card Slots: Standard SD card slot x 2 | |
Physical | |
Dimensions: 482 (W) x 52 (H) x 197 (D) mm | |
Weight: Approx. 2.3kg (except AC adaptor) | |
Power requirement: DC12~24V, Standard AC adaptor included | |
Connector: XLR 4-32 | |
Power consumption: Approx. 5W |
262-2249
hifisound Lautsprechervertrieb |