Kategorie: Profi- / Musiker-Equipment


Ausstattungsliste: Funktion-One FF6000


Ausstattung & technische Daten
Specification
Type DJ Mixer
Channel Information 6 Channels
Channels 1 & 2 switchable to Mic - Line, (mic input Lo Z balanced).
Channels 3 - 6 are switchable to either phono/line or line. All inputs have rear panel gain trims to set individual levels.
Channels 3 - 6 have a concealed switch to select phono or line input.
Front Panel Controls 1 Illuminated input select push switch with adjacent led indicator.
1 Gain pot with adjacent clip indicator and 5 segment led meter indicating signal presence.
3 band E.Q. featuring +6 dB boost and -25dB cut at HF 10kHz, Mid -1kHz & Bass 100Hz
Full routing to crossfader A - B or direct to master from all channels. Illuminated push buttons.
Cue switch.
Rotary or Linear faders on removable panel along with 45mm VCA controlled crossfader.
Master Section Very comprehensive effects routing and mixing facilities
Features 2 effects loops A & B with wet/dry mixing controls, punch or latching push switches.
Loop Swap facility. Mono switch and bal/pan control.
Send and return gain trims to allow correct level matching into any outboard effects processors.
Cue switch allows checking of the desired effect before selection.
1 switchable insert on the main outputs.
Outputs Master output available in stereo and mono on XLR connectors (balanced)
Zone output available in stereo and mono on XLR connectors (balanced)
Booth Monitors output switchable to mono on XLR connectors (balanced)
Record outputs are provided on phono connectors.
Console Mic An input for a separate console microphone (XLR connector Lo Z Balanced) is fitted. This signal is routed to the zone and master outputs but it is not present in the booth outputs. 2 band E.Q. Cue & Mic ON switch also fitted.
Monitoring Phones outputs are provided on 3.5mm and standard 6.5mm jack sockets driven by a powerful headphone amplifier.
Split cue switch and cue mixing control are also featured.
2 x 12 segment stereo led meters are fitted to visually monitor Cue and output signals.
Construction Steel Front panel with a rear printed polycarbonate overlay guarantees that the mixer will still look good in years to come.
Neu im Shop

ePaper Jahres-Archive, z.B. LP

ePaper Jahres-Archive, z.B. LP
>>als Download hier
462_22882_2
Topthema: Feurig
Feurig_1706536121.jpg
High-End-Standbox mit ESS AMT

Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.

>> Mehr erfahren
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (englisch, PDF, 13.99 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 21.23 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 7.2 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (deutsch, PDF, 7 MB)
Interessante Links:
  • www.hausgeraete-test.de
  • www.heimwerker-test.de
  • hifitest.de/shop/
Allgemeine Händlersuche
Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages

Musik&Akustik