Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
71_16205_2
Topthema: Raumakustik mit Schallabsorbern verbessern

Kategorie: Profi- / Musiker-Equipment


Ausstattungsliste: JBL PD564


Ausstattung & technische Daten
Specification
Typ 15” Horn-Loaded Full-Range Loudspeaker System
Frequency Range (-10 dB) 50Hz to 20kHz
Frequency Response (±3 dB) 90Hz to 17kHz
Coverage Pattern 60° x 40°
Directivity Factor (Q) 20
Directivity Index (DI) 13 dB
Crossover Modes Bi-amp/Passive switchable
Passive Crossover 1.2 kHz
Transducer Power Ratings (AES) LF: 450W 2hrs, 300W 100hrs
HF: 75W, 2hrs, 50W 100hrs
System Power Rating (IEC) Passive mode: 500W 2hrs, 300W 100hrs (IEC)
Maximum SPL Bi-amp: LF: 133 cont (139 peak)
HF: 132 cont (138 peak)
Passive: 132 cont (138 peak)
System Sensitivity (1W @ 1m) Passive Mode: 105 dB SPL
Nominal Impedance 8 ohms
Low Frequency Driver 2031H 380 mm (15 in) driver with 75 mm (3 in) voice coil
Nominal Impedance 8 ohms
Sensitivity (1W, 1m within operational band) 106 dB (avg 300Hz-1.3kHz)
High Frequency Driver JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m) 114 dB (avg 1.5k-5kHz)
Waveguide HF: PT-H64HF-1 300 x 300 mm (12 x 12 in)
Enclosure Trapezoidal with 10 degree side angles, 18 mm exterior grade 11-ply Finnish birch plywood.
Suspension Attachment 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).
Finish Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements.
WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature. See WRC/WRX configuration sheet for details.
Grille Powder coated 14 gauge perforated steel, acoustically transparent and weather resistant cloth backing.
Input Connector CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
Environmental Specifications Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX.
Dimensions (H x W x D in vertical orientation) 782.0 x 783.0 x 670.0 mm (30.8 x 30.8 x 26.4 in)
Net Weight 69.0 kg (152 lb)