379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigen
465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Manley NEO-CLASSIC SE/PP 300B
Ausstattung & technische Daten
| Specification | |
| Type | POWER AMPLIFIER |
| Vacuum Tubes | 2 x 300B (Output), 1 x 6SN7 (Driver), 1 x 6SL7 (Input), 2 x 5AR4 (Rectifier). (Units prior to 2011 used 5U4 rectifier tubes.) |
| Output Power @ 1kHz with 5 dB FeedBack in SINGLE-ENDED | 11 Watts @ 3% THD |
| Output Power @ 1kHz with 5 dB FeedBack in PUSH-PULL | 24 Watts @ 1.5% THD |
| Frequency Response with 5 dB FB in SINGLE-ENDED | 15 Hz - 15 kHz ±0.5 dB (measured at 5 watts) |
| Frequency Response with 5 dB FB in PUSH-PULL | 10 Hz - 20 kHz ±0.5 dB |
| GAIN SE Mode 0dB Feedback Setting | 30 dB |
| GAIN SE Mode 10dB Feedback Setting | 20 dB |
| Input Sensitivity with 5db FB SINGLE ENDED | 700mV for Maximum Power |
| Input Sensitivity with 5db FB PUSH-PULL | 450mV for Maximum Power |
| Input Sensitivity with 5db FB SINGLE ENDED | 165mV for 1V output into 8 Ohms |
| Input Sensitivity with 5db FB PUSH-PULL | 160mV for 1V output into 8 Ohms |
| S/N Ratio | SINGLE ENDED: 83.5dB Ref. 1W; 2.83v//8 Ohms,20KHz BW; 5dB FB. |
| PUSH-PULL: 85.4dB Ref. 1W; 2.83v//8 Ohms; 20KHz BW; 5dB FB. | |
| Dynamic Range | SINGLE ENDED: 94dB Ref. 3% THD; 20KHz BW; 5dB FB. |
| PUSH-PULL: 99.5dB Ref. 1.5% THD; 20KHz BW; 5dB FB. | |
| Input Impedance | 100 kOhm, direct coupled. |
| Optimum Speaker Load (switchable) | 4 to 12 Ohm range appropriate for 4 & 8 Ohm speakers |
| 12 to 20 Ohm range appropriate for 16 Ohm speakers | |
| Actual Output Impedance | SINGLE ENDED: 2.25 Ohms Actual |
| PUSH-PULL: 1.86 Ohms | |
| Damping Factor | SINGLE ENDED: 3.5 |
| PUSH-PULL: 4.3 | |
| Maximum Power Consumption | 240 Watts |
| Mains Voltage Frequency | 50~ 60Hz |
| Power transformer factory set for 100V, 120V or 220-240VAC operation for original destination country | |
| Operating Mains Voltage changeable with power transformer re-wiring and fuse value change. | |
| Mains Fuse 100-120VAC operation | MDA 3 Amp SLO-BLO Ceramic Time-Delay fuse |
| Mains Fuse 220-240VAC operation | MDA 1.5 Amp SLO-BLO Ceramic Time-Delay fuse |
| B+ Fuse | MDA 400 mA SLO-BLO Ceramic Time-Delay fuse |
| Badge Illumination | Units produced before 7/2003 use 8V, 0.3A "Fuse-Lamp" 1/4" X 1 1/4" - Serial numbers after NSEPP314 use LED illumination which probably wont burn out |
| Dimensions | W= 8.5, D= 23, H= 9 inches, Including projecting controls and parts |
| Minimum Mounting Surface Dimensions | Feet Footprint = W= 7.5" D= 18" |
| Shipping Weight | 41 lbs. each |
