Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Turbosound iQ12
System | |
Type | Powered Loudspeaker |
Frequency response | 52 Hz – 18 kHz ±3 dB |
45 Hz – 20 kHz -10 dB | |
Nominal dispersion | 80° H x 60° V @ -6 dB points |
Maximum SPL | 130 dB peak |
Crossover type | Active |
Transducers | 1 x 12" (308.5 mm) LF driver |
1 x 1" (25.4 mm) HF compression driver | |
Limiter | Independent HF, LF, peak and rms |
Amplifier | |
Maximum output power | 2,500 W |
Type | Class-D |
Protection | Short circuit, open circuit, thermal |
Connectors | |
Input A / B | 2 x combo jack/XLR |
Sensitivity | Line +4 dBu, mic -22 dBu, switchable |
Input impedance | 20 kO unbalanced, 40 kO balanced |
Maximum input level | +21 dBu |
Output A / B | 2 x XLR Linked to input |
Mix output | XLR, balanced |
Output impedance | 100 O unbalanced, 200 O balanced |
Ultranet input/link | 2 x RJ45 |
Mains Supply | Neutrik powerCON input 20A and link 15A |
Controls | |
DSP | Rotary push-encoder Buttons for Process, Setup, Exit, Enter |
Mixer section | 2 x gain controls (channels A and B) |
2 x Line/Mic switch | |
User DSP Functions | |
Factory EQ presets | Positioning, Sound mode, Sound modeling, FBQ |
Display | LCD 128 x 32, blue backlit |
Delay | 0 - 300 ms |
Equalisation | High and low shelving EQ |
2 x parametric EQ | |
Limiter | Zero attack input limiter |
Presets | 20 total presets, 19 user-definable |
Crossover | High Pass L-R 24 dB/oct |
Protection | Lock-out function for all settings |
Power Supply | |
Power consumption | 150 W @ 1/8 max power |
Enclosure | |
Dimensions HWD | 609 x 370 x 370 mm (24.0 x 14.5 x 14.5") |
Net weight | 14.7 kg (32 lbs) |
Construction | Injection-moulded polypropylene enclosure |
Finish | Black painted |
Grille | Powder coated perforated steel |
Flying hardware | M10 x 3 points |