Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Atmasphere MP-3
Features | |
Balanced Differential Design® | |
XLR connectors for phono and auxiliary inputs | |
XLR output connections | |
Patented direct-coupled Circlotronic® output | |
Zero feedback design throughout | |
Balanced differential passive phono equalization | |
Precision 23 position stepped volume control built with 96 resistors on a custom built switch | |
Two tape monitor inputs, tape functions use RCA jacks | |
Precision components used throughout | |
Total system phase switch | |
Low-noise "star" grounding topology | |
Three-year general coverage warranty with one year warranty on output tubes | |
Specifications | |
Line stage frequency response | 1 Hz-200 KHz, +0 dB, -2dB |
Line stage gain | 15 dB |
Line stage input impedance | 100 Kohm Ω single-ended / 200 Kohm Ω balanced |
Line stage output | 12 V |
Output impedance | 250 Ohms from 2Hz to 400KHz |
Phono stage input impedance | 47 K Ω, adjustable with rear panel loading strip |
Phono stage Input Overload | 500 mV |
Phono stage Max Output | ( at clipping ) 120 V peak-to-peak |
Phono gain | 55 dB |
Phono bandwidth | .5 Hz-90 KHz within ½ dB |
RIAA accuracy | Within .1 dB |
RIAA Phono sensitivity | ( for 0.5 V @ 1 KHz ) 0.2 mV |
Power Supply storage | 50 Joules |
Tube complement | 7 x 12AT7 |
2 x 6SN7GT | |
2 x 12AU7 | |
Dimensions | 13" deep x 17" wide x 5.5" tall ( 33 x 43 x 14 cm ) |
Faceplate dimensions | ( standard 3U rack, sans mounts ) 19" wide x 6" tall ( 48 x 15 cm ) |
Weight | 19 lbs. ( 8.6 kg ) |
Warranty | Three year, transferable |
One year for tubes |