Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKenwoods brandneue Multimedia-Headunit bringt nicht nur einen riesigen 10,1-Zoll-Bildschirm mit, sondern auch eine speziell auf Wohnmobile zugeschnittene Navigation.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Sunfire HRSIW8AMP
Specification | |
Amplifier Output | 520 watts rms into 4° |
High Cut Filter | 40 Hz - 160 Hz adjustable, with an LFE bypass position |
12 - 36 dB/octave adjustable slope | |
Frequency Response | 33 Hz - 150 Hz (-3 dB) |
Power Line | VoltageUS model: 120 VAC 50/60 Hz |
International model: 230 VAC 50/60 Hz | |
Dimensions (H x W x D) | 1.75" (1U) x 19" x 11.2" |
44.5 mm x 482.6 mm x 284.5 mm | |
Weight | 13.5 lb. (6.12 kg) |
Output Levels | Greater than 106 dB peak SPL (includes room gain) Measurement is at 1 meter, anechoic |
Total Harmonic Distortion (amplifier) | Less than 0.5% at 500W into 4° |
Input Sensitivity (full output) | 23 mV rms at 38 Hz with volume control set to maximum |
Input Impedance | 49 k° for Line-Level input |
20 k° for XLR input | |
XLR Input | Pin 1 Ground |
Pin 2 Positive | |
Pin 3 Negative | |
12 VDC Trigger Input | Input voltage range 2.2 -13 VDC |
Impedance approx 2800° (4.2 mA @ 12 V) 3.5 mm mono minijack, tip positive. |