Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Zubehör HiFi
Ausstattungsliste: Hypex Electronics UcD180 OEM
Features | |
Amplifier module | |
Runs on unregulated +/- rails | |
Pop-free start and stop control | |
Differential audio input | |
On-board clipping detection | |
DC-fault detection | |
Overcurrent and overvoltage protection | |
Power supply voltage: +/- 25-50V | |
Unit shuts down when either rail exceeds 52V | |
Output current limits at 10A | |
Output power: 180Wrms @ 4Ohm | |
Applications | |
Monitor loudspeakers for recording and mastering studios | |
Audiophile power amplifiers for professional and consumer use | |
Public Address systems | |
Home theatre systems | |
Active loudspeakers | |
Specification | |
Technique | UcD |
Power (4Ω) | 180W |
Power (8Ω) | 120W |
Channels | 1 |
HxR Ready | No |
Weight | 100g |
Dimensions mm | 73*67*33 |
SMPS Voltage +/- | 46V |
Recommended SMPS | SMPS400A180/SMPS1200A180 |
Over voltage protection @ | 52V |
Current limit @ | 10A |