379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: AV-Sonstiges
Ausstattungsliste: Crestron C2N-AMP-6X100
Ausstattung & technische Daten
| Typ | 6 Room + 2 Audio System |
| Audio | |
| Features | 12x8 stereo matrix switcher, 8-channel audio processor, 6-channel stereo power amplifier, input compensation, amp bridging, fault detection and protection |
| Input Signal Types | Stereo analog line (unbalanced) |
| Output Signal Types | Stereo speaker level, stereo analog line (unbalanced) |
| Adjustments – Typical of 12 stereo inputs (ANALOG SOURCES 1 – 12): | |
| Input Compensation | ±10.0 dB per input |
| Adjustments – Typical of 8 stereo room outputs (SPEAKER OUTPUTS 1 – 4, SPEAKER/LINE OUTPUTS 5 – 6, ROOM OUTPUTS 7 – 8): | |
| Volume Control | -80 to +20 dB |
| Mute | -100dB |
| Bass Control | ±12dB @ 100Hz, 2 dB steps |
| Treble Control | ±12dB @ 10kHz, 2 dB steps |
| Loudness Compensation | On/Off |
| Balance Control | Left/right adjustable |
| Mono Summing | Selectable |
| Performance – Typical of 6 stereo amplified outputs (SPEAKER OUTPUTS 1 – 6): | |
| Output Power | 50 Watts per channel at 8 Ohms; 75 Watts per channel at 4 Ohms; 150 Watts mono at 8 Ohms bridged |
| Frequency Response | 20 Hz to 20 kHz ±1 dB |
| THD+N | 0.25%, 1 kHz, 50W @ 8 Ohms |
| S/N Ratio | 100 dB, 20 Hz to 20 kHz, A-weighted |
| Stereo Separation | >70dB |
| Performance – Typical of 4 stereo unamplified outputs (LINE OUTPUTS 5 – 6, ROOM OUTPUTS 7 – 8): | |
| Frequency Response | 20 Hz to 20 kHz ±0.5 dB |
| THD+N | 0.05%, 20 Hz to 20 kHz |
| S/N Ratio | 110 dB, 20 Hz to 20 kHz, A-weighted |
| Stereo Separation | >90 dB |
| Communications | |
| Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP |
| Cresnet | Cresnet slave |
| Connectors | |
| ANALOG SOURCES L/R IN 1 – 12 | (24) RCA female comprising (12) unbalanced stereo line-level audio inputs; Maximum Input Level: 2 Vrms; Input Impedance: 10k Ohms |
| ANALOG SOURCES L/R OUT 1 – 12 | (24) RCA female comprising (12) unbalanced stereo loop-thru outputs; Paralleled with inputs, connect to additional C2N-AMP-6X100 units or other audio preamplifier/receiver |
| SPEAKER OUTPUTS L/R 1 – 6 | (6) 4-pin 5 mm detachable terminal blocks; Power amplifier outputs; Wire Size: Terminals accept up to 14 AWG |
| LINE OUTPUTS L/R 5 – 6 | (4) RCA female comprising (2) unbalanced stereo line-level audio outputs (same signal as SPEAKER OUTPUTS 5 – 6); Maximum Output Level: 2 Vrms; Output Impedance: 100 Ohms |
| ROOM OUTPUTS L/R 7 – 8 | (4) RCA female comprising (2) unbalanced stereo line-level audio outputs; Maximum Output Level: 2 Vrms; Output Impedance: 100 Ohms |
| NET | (2) 4-pin 3.5mm detachable terminal blocks; Cresnet slave ports, paralleled |
| LAN | (1) 8-wire RJ45 female; 10Base-T/100Base-TX Ethernet port |
| 120V~50/60Hz MAX 5A (US/North America) | (1) IEC 60320 C14 main power inlet; Mates with removable power cord (included) |
| 220-240V~50/60Hz MAX 2.5A (International) | (1) IEC 60320 C14 main power inlet; Mates with removable power cord (not included) |
| G | 6-32 screw, chassis ground lug |
| COMPUTER (front) | (1) USB Type B female; USB computer console port; For setup only |
| Power Requirements | |
| Main Power (US/North America) | 5 Amps @ 120 Volts AC, 60 Hz |
| Main Power (International) | 2.5 Amps @ 220-240 Volts AC, 50/60 Hz |
| Power Consumption | 55 Watts idle, all amplifier channels off; 12 Watts with power switch turned off |
| Cresnet Power Usage | none |
| Environmental | |
| Temperature | 41° to 104°F (5° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 650 BTU/hr @ 8 Ohms, all amplifier channels at 1/8th output power; 400 BTU/hr @ 4 Ohms, all amplifier channels at 1/8th output power; 85 BTU/hr idle, all amplifier channels off |
| Enclosure | |
| Chassis | Metal with black finish, vented sides, fan-cooled |
| Front Panel | Extruded metal with black finish and polycarbonate label overlay |
| Mounting | Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) |
| Dimensions | |
| Height | 3.47 in (89 mm) |
| Width | 17.28 in (439 mm) |
| Depth | 13.64 in (347 mm) |
| Weight | C2N-AMP-6X100 25.0 lb (11.4 kg) |
| C2NI-AMP-6X100 26.4 lb (12.0 kg) | |
