390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: AV-Sonstiges
Ausstattungsliste: Crestron SWAMP-24X8
Ausstattung & technische Daten
| Typ | Sonnex® Multiroom Audio System |
| Audio | |
| Features | 24x10 stereo matrix switcher, 8-channel stereo DSP, 8-channel stereo power amplifier, Sonnex® Digital Audio Transport, speaker profiles, Sonnex Speaker Protect™, 5-band graphic or parametric EQ, Dynamic Range Control (DRC), |
| tone profiles, source gain compensation, amp bridging, output bussing, individual zone power control, global standby, source signal detection, amplifier temperature and fault monitoring, priority modes | |
| paging[6],do-not-disturb[6], alarm clock and sleep timer[6] | |
| Input Signal Types | stereo analog line (unbalanced and balanced), S/PDIF coaxial (2-channel PCM only) |
| Output Signal Types | Stereo speaker level, S/PDIF coaxial (2-channel PCM only), Sonnex Link |
| Typical of 24 stereo inputs: | |
| Source Compensation | ±10.0 dB per input |
| Input Monitoring | Source Signal Detect |
| Analog-To-Digital Conversion | 24-bit 48 kHz |
| Typical of up to 8 amplified stereo zone outputs: | |
| Digital-To-Analog Conversion | 24-bit 48 kHz |
| Output Power | 140 Watts per channel at 8 Ohms; 240 Watts per channel at 4 Ohms; 400 Watts per channel at 8 Ohms bridged |
| Damping Factor | >200 @ 20 Hz |
| Amplifier Monitoring | Over Current, Over/Under Voltage, Over Temperature, DC Offset, Clipping |
| Frequency Response | 20 Hz to 20 kHz ±0.5 dB |
| THD | 0.02% |
| S/N Ratio | >105dB SPDIF in, >100dB balanced or unbalanced analog in, A-weighted |
| Stereo Separation | >90dB |
| Zone Separation | >95dB |
| Zone Volume Level Control | -80.0 to +20.0 dB, adjustable from 0% to 100% plus mute |
| Bass Control | ±12.0 dB |
| Treble Control | ±12.0 dB |
| Loudness Compensation | On/Off |
| Dynamic Range Control | On/Off |
| Balance Control | Left/right adjustable |
| Mono Summing | Selectable |
| Power Limiting | Sonnex Speaker Protect (SSP®) output limiting; configurable 40 to 140 Watts @ 8 Ohms, 40 to 240 Watts @ 4 Ohms, 40 to 400 Watts @ 8 Ohms bridged |
| Tone Profiles | Flat, Classical, Jazz, Pop, Rock, Spoken Word |
| EQ Modes | 5-band graphic or 5-band parametric EQ |
| GEQ Center Frequencies | 63, 250, 1k, 4k, 16k Hz |
| GEQ Gain | ±12.0 dB per band |
| PEQ Filter Types | EQ, High Pass, Low Pass, Treble Shelf, Bass Shelf, Notch |
| PEQ Center Frequency | 10 to 20,000 Hz per band |
| PEQ Gain | ±12.0 dB per band |
| PEQ Bandwidth | 0.1 to 3.5 octaves per band |
| Speaker Profiles | Comprises 5-band GEQ and SSP settings |
| Bus Volume Offset | ±12.0 dB per zone for output bussing |
| Typical of 2 digital stereo zone outputs: | |
| Resolution/Bitrate | 24-bit 48 kHz |
| Communications | |
| Ethernet | For control and console, 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP |
| Cresnet | For control and console, Cresnet slave |
| Sonnex Link | 64-channel (48 utilized) digital audio w/embedded control, auto-discovery, auto-negotiating |
| Display | |
| LCD Display | Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line; Displays source & zone setup, amplifier and expander status, network & control configuration, volume levels, and other parameters |
| Power Requirements | |
| Main Power (US/North America) | 12 Amps @ 120 Volts AC, 50/60 Hz; A dedicated 15 Amp circuit is strongly recommended |
| Main Power (International) | 6 Amps @ 220-240 Volts AC, 50/60 Hz; A dedicated 10 Amp circuit is strongly recommended |
| Cresnet Power Usage | none |
| Environmental | |
| Temperature | 41° to 104°F (5° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 475 BTU/Hr (140W@8Ω), 750 BTU/Hr (240W@4Ω) |
| Construction | |
| Chassis | Metal with black finish, vented sides, variable-speed fan-cooled |
| Faceplate | Metal, black finish with polycarbonate label overlay |
| Mounting | Freestanding or 4U 19-inch rack-mountable (feet and rack ears included) |
| Dimensions | |
| Height | 7.51 in (191 mm); 6.97 in (178 mm) without feet |
| Width | 19.0 in (483 mm); 17.29 in (439 mm) without rack ears |
| Depth | 18.47 in (470 mm) |
| Weight | 60.0 lb (27.3 kg) |
