Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi Endstufe 2-Kanal
Ausstattungsliste: Arc Audio SE 2150
Features | |
Audiophile sound quality based design | |
Designed by Robert Zeff | |
Class A/B switching design | |
Microprocessor controlled design | |
Microprocessor controlled Code based flashing diagnostics | |
Concealed adjustment controls | |
Open architecture adjustable crossovers on all channels HP/BP/LP/FP | |
12/24Db per octave selectable crossover slopes on all channels | |
Internal chassis force cooled speed controlled fan for optimum cooling | |
Hi/Low level balanced switchblade RCA inputs for maximum system integration | |
RJ45 Ethernet input connections for true balanced input connections | |
Block type terminal connections | |
256 color user selectable illumination circuit | |
Combined Bias circuit and temperature regulation circuit to regulate bias and lower THD at any point in total thermal cycle | |
Microprocessor high voltage power supply allows the amplifier to optimize power output at different ohm loads without the loss of efficiency or sound quality | |
Vdrive based preamp stage improves efficiency lower internal signal loss | |
Hand picked output devices used on all SE amplifiers. | |
Specifications | |
2 Channels @ 4 ohms | 150 Watts |
2 Channels @ 2 ohms | 300 Watts |
1 Channel @ 4 ohms (bridged) | 600 Watts |
1 Channel @ 2 ohms (bridged) | 600 Watts |
Frequency Response | 7Hz - 50kHz |
Crossover Range | 30Hz - 500Hz |
Crossover Range X10 | 300Hz - 5500kHz |
Bass Boost | 0 - 15dB @ 20Hz - 80Hz |
S/N Ratio | 88dB |
Input Sensitivity (Low) | .3V - 4V |
Input Sensitivity (Bal) | .4V - 8V |
Max current draw | 125A @ 1060 Watts 20% THD |
Idle Current | 1.14 Amp |
Fuse | 2 x 40 Amp |
Dimensions | 15.5" (L) x 8.0" (W) x 2.5" (H) |
323-2511
Masori |