390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 401e
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) | 110Hz - 22kHz |
| Frequency Range (-10dB) (1) | 80Hz - 24kHz |
| System Sensitivity (1W @1m) (2) | 88dB (1W = 2.45V for 6 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1kHz to 6kHz) | 120 degrees |
| Directivity Factor (Q) | 5.26 averaged 1kHz to 6kHz |
| Directivity Index (DI) | 6.3 averaged 1kHz to 6kHz |
| Rated Maximum SPL | Average: 105dB Peak: 111dB |
| Power Handling (3) | Average: 50W Programme: 100W Peak: 200W |
| Recommended Amplifier Power | 100W @ 6 Ohms |
| Nominal Impedance | 6 Ohms |
| Transformer Taps (via front rotary switch) | 70V: 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation 100V: 30W / 15W / 7.5W / OFF & Low Impedance operation |
| Crossover | 7kHz inductively coupled |
| TRANSDUCERS | |
| Low Frequency | 100mm (4.00") mineral loaded polypropylene |
| High Frequency | 19mm (0.75”) ICT™ aluminium dome. |
| PHYSICAL | |
| Enclosure | Back Can: Reflex loaded UL 94V-0 rated ABS Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Back Can | Complete with fixed backcan |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Hole Cutout Diameter | 187mm (7.36") |
| Dimensions | Bezel diameter: 205mm (8.07") Front of ceiling to rear of pod: 147.60mm (5.81") |
| Net Weight (ea) | 3.05kg (6.72lb) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Clamping Design | Min / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79") Recommended clamp torque: 1.5Nm |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
