462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 403DCe
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3 dB) (1) BM Backcan | 110 Hz - 50 kHz |
| Frequency Range (-10 dB) (1) BM Backcan | 80 Hz - 54 kHz |
| System Sensitivity (1W @ 1m) (2) | 88 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Power Handling (3) | Average: 60 W |
| Programme: 120 W | |
| Peak: 240 W | |
| Recommended Amplifier Power | 120 W @ 16 ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated Maximum SPL | Average: 107 dB |
| Peak: 113 dB | |
| Transformer Taps (via front rotary switch) | 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation |
| 100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation | |
| TRANSDUCERS | |
| Dual Concentric point source driver | 1 x 100 mm (4.0”) Dual Concentric driver, using Omnimagnet technology |
| Low Frequency | 35 mm (1.38”) voice coil, treated multi fiber paper pulp cone |
| High Frequency | 20 mm (0.79”) PEI dome |
| PHYSICAL | |
| Enclosure | Backcan: Reflex loaded UL 94V-0 rated ABS |
| Baffle: Reflex loaded UL 94V-0 rated ABS | |
| Grille: Steel, with weather resistant coating | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed backcan |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Dimensions | |
| Bezel Diameter | 205.0 mm (8.07”) |
| Front of ceiling to rear of pod | 147.6 mm (5.81”) |
| Hole cutout diameter | 187 mm (7.36”) |
| Net Weight (ea) | 2.75 kg (6.06 lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Packed Quantity | 2 |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
