462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 801sub
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) BM Back can | 58Hz - 160Hz |
| Frequency Range (-10dB) (1) BM Back can | 42Hz - 300Hz |
| System Sensitivity (1W @1m) (2) | 92dB (1W = 2.45V for 6 Ohms) |
| Rated Maximum SPL | Average: 112dB |
| Peak | 118dB |
| Average (with THP60) | 110dB |
| Power Handling Average | 100W |
| Programme | 200W |
| Peak | 400W |
| Recommended Amplifier Power | 200W @ 6 Ohms |
| Nominal Impedance | 6 Ohms |
| Transformer Taps (via front rotary switch) | 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation 100V: 60W / 30W / 15W / OFF & Low Impedance operation |
| Distortion | 10% Full Power (7.75V) 2nd Harmonic 70Hz: 1.22% 100Hz: 0.38% 3rd Harmonic 70Hz: 1.90% 100Hz: 0.49% |
| 1% Full Power (2.45V) 2nd Harmonic 70Hz: 0.91% 100Hz: 0.04% 3rd Harmonic 70Hz: 1.28% 100Hz: 0.44% | |
| Crossover | Integral 2nd order passive, 160 Hz |
| TRANSDUCERS | 1x 200mm (8.00") Long throw woofer with multi fibre paper pulp cone |
| Backcan | Zinc plated steel |
| Baffle | Reflex loaded UL 94V-0 rated ABS |
| Grille | Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed back can |
| Pre Install (PI) | Separate back can for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22mm |
| Conduit Knockouts | 3 Sets of horizontal positions 19 / 22 / 28mm 0.75 / 0.87 / 1.10" |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings | UL-1480, UL-2043, CE |
| BM Hole Cutout Diameter | 295mm (11.61") |
| PI Hole Cutout Diameter | 295mm (11.61") |
| Dimensions | |
| Bezel Diameter | 325mm (12.80") |
| BM model: Front of ceiling to rear of back can | 310.5mm (12.22") |
| BM model: Front of ceiling to top of safety loop | 327.8mm (12.90") |
| PI model: Front of ceiling to rear of speaker unit | 117.50mm (4.63") |
| PI model: Front of accessory back can bezel to top of safety loop (PI) | 168.5mm (6.63") |
| Net Weight (ea) | |
| CMS801 SUB BM | 6.3kg (13.89lbs) |
| CMS801 SUB PI | 3.2kg (7.05lbs) |
| PI Backcan | 4kg (8.81lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (mud) ring Back can for PI model |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
