Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Röhrenverstärker
Ausstattungsliste: Cary Audio SLP 05
Specifications | |
Circuit Type | Class A Triode Vacuum Tube Preamplifier Design |
Output Voltage | 2 volts rated, 12 Volts maximum |
Overall Gain | 17 dB - Single-ended RCA |
24 dB - Balanced Operation | |
Rated Distortion | 0.03 % THD |
Noise and Hum | -90 dB below full output |
Input Impedance | 50,000 Ohms - RCA |
100,000 Ohms - XLR | |
Output Impedance | 400 Ohms |
Frequency Response | 5 Hz to 250,000 Hz |
Vacuum Tubes | 8 ea - 6SN7 octal tubes for the balanced, headphone and gain stages |
1 ea - 5AR4 Rectifier Tube in Power Supply | |
Power Transformer(s) | R CORE 200% Duty Cycle |
Resistors | 1% Metal Film |
Capacitors | Polystyrene, Film and Foil |
Power Supply Capacitors | 2 ea - 560µF @ 400 VDC |
AC Cord | 3 Conductor, Detachable |
AC Power Requirements | 117 or 234 Volts AC @ 50 or 60 Hz |
Consumption | 75 watts - Operation |
25 watts - Standby | |
Warm-Up Time | 3 Minutes |
Break-In Time | 100 hours of playing time |
Finish | Silver color anodized solid aluminum faceplate and a Jaguar |
Features | Remote volume control and muting |
One Cinema Bypass | |
One tape monitor loop | |
One XLR balanced stereo input | |
Three RCA stereo inputs | |
One XLR balanced and two RCA pairs of preamplifier outputs | |
Weight | 16 lbs - preamplifier |
19 lbs - external power supply | |
Dimensions | 6.25" H x 17" W x 12" D - preamplifier |
4.5" H x 17" W x 12" D - power supply |