Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Tonarme
Ausstattungsliste: Dynavector 507MKII
Specifications | |
Type | Bi-Axis inertia controlled Dynamic and Eddy Current Damping Dynamic Balance type tone arm |
Overall length | 306mm. With head shell: max 326 mm |
Effective length | 241mm (i.e. tonearm pivot point to cartridge stylus point) |
Overhang | 15mm |
Offset angle | 21.5 degree |
Height | 59mm lifts up to 92mm |
Height adjustment range | 39mm-72mm at sub arm center |
Depth | 36mm without connecting cable |
Optimum cartridge weight | 15-35 grams, including headshell |
Horizontal tracking angle error | -1.1 degree - +2.2 degree , 0 degree at inner band of record, 2.2 degree at outside |
Tracking force adjustment range | 0-38 grams by 0.2 grams step |
Sensitivity | Horizontal:less than 50 mgrams, Vertical:less than 40 mgrams |
Net weight | 1,380 grams |
Output connection | 5P connector |
Headshell connection | EIA standards 4 Pin connector |
Accessary | low resistance (0.046 ohms/m, 54pF/m) high quality arm cable, |
milled aluminium headshell weight 15.4 grams. | |
mounting template for the arm | |
overhang guage for the headshell |
106-2387
HiFi Gogler | Oliver Gogler e.K. |